Sony DCR-TRV950E Operating Instructions Manual page 296

Types of trouble and how to correct trouble
Others
Symptom
The title is not recorded.
The cassette label is not recorded.
Digital program editing to a tape
does not function.
Digital program editing to a
"Memory Stick" does not function.
The Remote Commander supplied
with your camcorder does not work.
The picture from a TV or VCR does
not appear even when your
camcorder is connected to output on
the TV or VCR.
Downloaded From VideoCamera-Manual.com Manuals
296
Cause and/or Corrective Actions
• The cassette has no cassette memory.
c Use a cassette with cassette memory (p. 154).
• The cassette memory is full.
c Erase unwanted titles (p. 157).
• The cassette is set to prevent accidental erasure.
c Slide the write-protect tab so that red portion is not visible
(p. 34).
• The tape has a blank portion between recorded portions.
c Superimpose the title to recorded positions (p. 155).
• The cassette has no cassette memory.
c Use a cassette with cassette memory (p. 160).
• The cassette memory is full.
c Erase unwanted data (p. 157, 162).
• The cassette is set to prevent accidental erasure.
c Slide the write-protect tab so that red mark is not visible
(p. 34).
• The input selector on the VCR is not set correctly.
c Check the connection and set the input selector on the VCR
again (p. 126)
• The camcorder is connected to DV equipment of other than
Sony using the i.LINK cable.
c Set it to IR (p. 134).
• You have attempted to set a programme on a blank portion of
the tape.
c Set the programme again on a recorded portion (p. 138).
• The camcorder and the VCR are not synchronised.
c Adjust the synchronisation (p. 136).
• The IR SETUP code is incorrect.
c Set the correct code (p. 130).
• Setting programme on a blank portion of the tape is attempted.
c Set the programme again on a recorded portion (p. 205).
• COMMANDER is set to OFF in the menu settings.
c Set it to ON (p. 279).
• Something is blocking the infrared rays.
c Remove the obstacle.
• The batteries are inserted with + and – incorrectly matching +
and – inside the battery compartment.
c Insert the batteries correctly (p. 341).
• The batteries are dead.
c Insert new ones (p. 341).
• DISPLAY is set to V-OUT/LCD in the menu settings.
c Set it to LCD (p. 280).