Technical Assistance Service; Warranty Conditions; Used Appliances And Packaging; Environmentally-Friendly Waste Management - Bosch prp626b70e01 Operating Instructions Manual

Fault
The kitchen smells of gas.
The burner immediately
switches off after releasing
the control knob.

Technical Assistance Service

Warranty conditions

Used appliances and packaging

Environmentally-friendly waste
management
18
Possible cause
A gas tap has been left on.
Incorrect coupling of gas cylinder.
Possible gas leak.
The control knob was not held down for
long enough.
The grooves on the burner are dirty.
When contacting our Technical Assistance Service,
please provide the product number (E-No.) and
production number (FD) of the appliance. This
information is given on the specifications plate located on
the lower section of the hob and on the label in the user
manual.
The applicable warranty conditions are those set out by
the company's representative office in the country of
purchase. Detailed information is available from retail
outlets. Proof of purchase must be presented to obtain
the benefits of the warranty.
We reserve the right to introduce changes.
If the ) symbol is shown on the specifications plate, bear
in mind the following instructions.
Unpack the appliance and dispose of the packaging by
environmentally-friendly means.
This appliance complies with European directive 2002/
96/CE on electrical and electronic equipment identified
as WEEE (waste electrical and electronic equipment).
Solution
Turn off the taps.
Check that the coupling is sound.
Shut off the gas supply, ventilate the
premises and immediately notify an
authorised installation technician so that they
can check and certify the installation. Do not
use the appliance until you are sure that
there is no gas leak in the installation or
appliance itself.
Once the burner is on, hold the control knob
down a few seconds longer.
Clean the grooves on the burner.