Installing The Mp Drivers - Canon Pixma MX700 Quick Start Manual

Installing the MP Drivers

The following information is for using the machine with USB connection.
If you use the machine over wired LAN, refer to the Network Setup Guide.
Information Common to Windows and Macintosh
Notes on the Installation Process
If the Select Language screen appears, select a language, then click Next.
If the Select Your Place of Residence screen appears, select your place of residence, then
click Next.
There are two ways of installing the MP Drivers and other software
Easy Install: the items included on the Setup CD-ROM are installed automatically
Custom Install: you can select particular items to install
*
The available software programs included on the Setup CD-ROM may vary depending on
the country or region of purchase.
When the User Registration screen appears, click Next. If your computer is connected to the
Internet, the on-screen instructions to register your product will appear.
Registration can also be performed from the icon on the desktop after installation is
completed.
The User Registration screen will only be displayed when Europe, Middle East, Africa is
selected on the Select Your Place of Residence screen.
Notes on the Print Head Alignment
If the straight line is misaligned or print quality is not satisfactory after installing the MP
Drivers, you may need to align the Print Head. Refer to "Aligning the Print Head" in the User's
Guide on-screen manual.
Information for Windows
Depending on the country or region of purchase, the following two CD-ROMs are included in
the package for the Windows setup.
- Windows (CD-1)
- Windows (CD-2) Macintosh
In this case, insert the "Windows (CD-1)" Setup CD-ROM first to start the installation, and
follow the on-screen instructions to complete the installation.
Log into a user account with the administrator privilege.
Before installing the MP Drivers, disable all anti-virus programs and automatically loading
programs.
If the Found New Hardware or Found New Hardware
Wizard screen appears automatically, remove the USB
cable connected to your computer. Click Cancel to quit
the screen. In Windows Vista, the screen may close
automatically when the USB cable is unplugged. Then
turn off the machine and start the installation process
again. For details on the installation process, refer to
your setup sheet.
If the AutoPlay screen appears, click Run
Msetup4.exe. In Windows XP and Windows 2000, this
screen will not appear.
®
*
:
Installing the MP Drivers 7