Rear Spacers - Electrolux EN3481AOX User Manual

Hide thumbs Also See for EN3481AOX:
Table of Contents

Advertisement

Available languages

Available languages

8.2 Location
A

8.3 Rear spacers

4
8.4 Levelling
B
2
1
3
The appliance should be installed well
away from sources of heat such as radia-
tors, boilers, direct sunlight etc. Ensure
that air can circulate freely around the
back of the cabinet. To ensure best per-
formance, if the appliance is positioned
below an overhanging wall unit, the mini-
mum distance between the top of the
cabinet and the wall unit must be at least
100 mm . Ideally, however, the appliance
should not be positioned below overhang-
ing wall units. Accurate levelling is ensur-
ed by one or more adjustable feet at the
base of the cabinet.
WARNING!
It must be possible to disconnect
the appliance from the mains
power supply; the plug must
therefore be easily accessible after
installation.
You can find the two spacers in the bag
with documentation.
Do these steps to install the spacers:
1.
Release the screw.
2.
Engage the spacer below the screw.
3.
Turn the spacer to the right position.
4.
Tighten again the screws.
When placing the appliance ensure that it
stands level. This can be achieved by two
adjustable feet at the bottom in front.
ENGLISH
47

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

En3481aowEn3487aohEn3487aooEn3487aoyEn3487aoj

Table of Contents