Epilating - Silvercrest SE 32 A1 Operation And Safety Notes

j
Pull off the protective cap
j
Press and hold down the safety lock button in the middle of the On /
Off switch
6

Setting 1 (slower speed) for particularly sensitive or difficult to
access parts of your body.

Setting 2 (higher speed) for quicker epilating of larger, less sensi-
tive areas (e.g. legs, arms).

Epilating

Q
DANGER OF SKIN IRRITATION!
J
When using the epilator do not pass it too often over the same
part of your skin. Do not apply too much pressure!
J
Do not use body lotion or any other kind of similar substance
(e.g. cosmetics) before using your epilator!
Not observing this advice may result in the tweezers not being
able to capture the hairs properly; the tweezers become sticky
and their epilation effect is reduced.
Tip: Test your skin sensitivity first by trying the epilator on a small
patch of skin.
j
Wash the area to be treated with warm soapy water.
j
Dry the skin carefully.
j
Rub the skin to be epilated against the direction of hair growth
with a rough sponge or luffa glove to make the hair stand up.
j
Switch on the epilator.
j
Tighten the selected patch of skin.
from the epilator head
1
and slide the switch upwards into setting "I" or "II":
First use
.
3
GB/MT 61