Wireless remote controller
Indicates set temperature.
Indicates the selected airflow volume
Indicates when ON-TIMER is set.
Indicates the ON-TIMER setting time.
Nothing displayed when ON-TIMER is
Sends signal to the air conditioner.
Every time this button is pressed, the mode is
switched as below.
Used to reset (turn off) the filter sign.
Press the button only after completing
the filter cleaning.
Sets ON TIMER operation.
Sets OFF TIMER operation.
Sets current time.
* All displays are described in the liquid crystal display for explanation
Indicates the status of swing louver.
Indicates selected operation with
Indicates for two seconds when FILTER
button is pressed.
Indicates when OFF-TIMER is set.
Indicates OFF-TIMER setting time. Indicates the
current time when the OFF-TIMER is not set.
When this is pressed once, the unit starts to
operate and when this is pressed once again,
it stops operating.
Used to swing the louver.
Every time this button is pressed,
Sets room temperature by pressing
Sets time when setting the time.
Used to cancel the TIMER SETTINGS.
Used to reset the microcomputer.
'12 • PAC-T-174