System Requirements; Product Setup; Windows User - D-Link DCS-2332L Quick Installation Manual

SySTEM REQUIREMENTS

• Computer with Microsoft Windows
• PC with 1.3GHz or above and at least 128MB RAM
• Internet Explorer 7, Firefox 12, Safari 4, or Chrome 20 or higher version with Java installed and enabled
• Existing 10/100 Ethernet-based network or 802.11g/n wireless network

PRODUCT SETUP

WiNDOWs user

Step 1:
Locate the antenna included with your DCS-2332L and attach it to the antenna connector located on
the side of the DCS-2332L.
Step 2:
Carefully remove the rubber seal on the back of the DCS-2332L, and use the included Ethernet cable
to connect the DCS-2332L to your network.
Step 3:
Connect the external power supply to a power outlet. Wait until the power LED turns green.
Step 4:
Insert the Installation CD into your CD-ROM drive. If the Setup Wizard does not automatically run, go
to Start > Run, and type in D:\setup.exe (where D: represents the letter of your CD-ROM drive) and
click OK. When the Setup Wizard appears, click Set up your Cloud Camera and follow the on-screen
instructions.
Step 5:
After configuring your DCS-2332L, you can remove the Ethernet cable and carefully reinsert the rubber
seal.
DCs-2332l
®
8/7/Vista/XP, or Mac with OS X 10.6 or higher
3