Miele CVA 4070 Operating And Installation Instructions page 46

Descaling the appliance
^ The display will prompt you through
the next steps:
– to fill the descaling agent into the
water tank
– take the water tank out
– fill the water tank with fresh lukewarm
tap water to the mark k. If not filled
to the mark, the descaling will be
cancelled prematurely and
incomplete
Dissolve two of the enclosed
descaling tablets in the water. Close
the water tank and insert into
position.
^ Set the descaling funnels under the
coffee dispensers. Set the funnel in
the holes of the drip tray so the
dispensed liquids are guided in the
drip tray.
During the descaling process the
descaling solution will flow from the hot
water and coffee dispensers. The
machine rests briefly to allow the
solution to take affect before
dispensing again.
46
^ Please fill with fresh water: Take the
water tank out, rinse out any
descaling residues thoroughly with
water. Fill with fresh water to the k
mark.
During rinsing water runs from the
dispensers. When the display shows
Please empty the drip tray: Empty the
drip tray. Since the machine is also
rinsed inside, the drip tray needs to be
emptied to continue rinsing.
When the display shows: Process
finished: Descaling is complete. Follow
the prompts in the display. The
appliance is rinsed a final time.
Since the lines are drained during
descaling, they must be filled with
water before the next use. See
"Making coffee - Cappuccino and
milk froth".