Transferring A Call To Another Extension; Receiving A Transferred Call From Another Extension; Ringer On/Off And Ringer Volume - RCA ViSYS 25255RE2 User Manual

Transferring a Call to Another Extension

1. Press XFER Soft key when the phone is in Talk mode.
2. Use VOL (- or +) to select the desired handset or base you want to transfer to, and then
press the SELECT Soft key.
3. The unit will intercom
Wait until the selected handset or base answers the intercom call and have a
conversation and then hang up to finish the transfer or press Conference to have a 3
way conference call.
4. If the selected unit rejects the intercom call,
call is transferred back to the original unit and the display will show as below a) or b)

Receiving a Transferred Call from Another Extension

If the unit receives a transfer call paging,
display. Press the Talk button (handset only) or speaker button (both base and handset)
leave the corded handset on the base unit
If you press the REJECT Soft key
intercom paging will be stopped

Ringer On/Off and Ringer Volume

1. Make sure the phone is in idle mode.
2. Press the VOL (- or +) button to activate the ringer volume setting.
select the direct line which you want to set, then use the VOL (- or +) button to scroll to your selection.
The default setting is VOL 3.
3. Press the SELECT Soft key to save your selection.
NOTE: If you choose the ringer OFF, the screen displays L1/L2 RINGER OFF.
Speakerphone, Handset, and Corded Headset V olume
While the phone is in use, during the desired mode, press the VOL (+ or -) buttons until
you reach a comfortable listening level. The phone stores the setting after the last button
pressed.
30
the selected handset or base.
ring
or the call is not answered within 30 seconds, the
Intercom
to answer the call.
or the call is not answered within 30 seconds
and the call is transferred back to the original unit.
The current call is put on hold.
call from base/Handset X shows in the
Press Line1 or Line2 button to
or
, the