Table of Contents
Advertisement
6
When done, use the right arrow button to move the cursor to Done, and then press E. The
network connection screen appears and the verification process starts.
― A connection with the router is established, but the Internet cannot be accessed.
7
When the connection has been verified, the
are setup and ready to
use." message appears.
Manual Network Setup (Wireless)
Offices may use static IP addresses.
If this is the case, ask the network administrator for the IP address, subnet mask, gateway and DNS server
address. Enter these values manually.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these steps.
1
Right click the Network icon on the bottom right of the screen.
2
In the pop-up menu that appears, click Status.
3
On the dialog that appears, click the Support tab.
4
On the Support Tab, click the Details button. The Network connection values are displayed.
"Your wireless network and Internet connection
How to set up manually
1
Network Type
Wireless
Set
to
from the
2
The
Network
function searches for available wireless networks. When done, it displays a list of the
available networks.
3
In the list of networks, press the u or d button to select a network, and then press the E button
twice.
― If the desired wireless router does not appear, select
― If the router cannot be found after retrying, select the
Add Network
The
button appears.
Select
Add Network
to add a wireless router to connect to.
4
Enter password.
If the
screen appears, go to step 5. If you select a wireless router that does not
have security, go to step 7.
5
If the router has security, enter the
Enter password.
6
When done, use the right arrow button to move the cursor to Done, and then press E. The
network connection screen appears and the verification process starts.
7
Stop
Select
while network connections are being attempted. This will stop the connection.
8
Select
IP Settings
on network connection screen. The
9
Select the field at the top, press E, and then set
process for each field in the
IP
Address.
― Setting
IP Settings
to
Enter manually
Network Settings
page.
Refresh
to search again.
Stop
button.
(Security key or PIN).
IP Settings
screen appears.
IP Settings
Enter
manually. Repeat the entry
to
automatically changes
DNS Setting
to
Enter
manually.
Advertisement
Table of Contents
