Table Of Contents; Installation Procedure - Honeywell redlink Installation Manual

RedLINK™ Installation Guide (TrueZONE™)
System installation at a glance
REMOTE
CONTROL

Installation procedure

This document covers linking and installation procedures for FocusPRO wire-
less thermostats and RedLINK accessories in TrueZONE applications.
Before you begin, you must mount, wire & configure the TrueZONE panel
and wireless adapter (see TrueZONE Installation Guide), then follow steps
below.
You must configure the TrueZONE panel before you begin
1
Install batteries in wireless devices ....................................Page 3
2
Link all devices to wireless network ..............................Pages 3-5
3
Exit wireless setup ..............................................................Page 6
4
Customize thermostat (installer setup) ........................Pages 6-10
5
Mount thermostat and outdoor sensor .............................Page 11
To replace system components if needed, see page 13
If you have more than one TrueZONE Panel: Thermostats are linked to specific zone
panels. Optional accessories must be linked to each zone panel separately.
69-2090EFS-07
THERMOSTAT
WIRELESS
ADAPTER
THERMOSTAT
TrueZONE
PANEL
2
OUTDOOR
AIR SENSOR
HVAC
EQUIPMENT
M33903