Using C-Mail; Creating And Sending C-Mail Messages; Reading Received C-Mail Messages - Hitachi WOO H001 Basic Manual

Using C-mail

C-mail is a service that uses phone numbers as addresses
to exchange messages between au cell phones that
support c-mail. A c-mail message can contain up to 50
double-byte (or 100 single-byte) characters.
• The c-mail send charge applies when sending c-mail.
C-mail Safety Block
■
C-mail safety block is a function that allows you to reject
c-mails that include URLs (http://△△△, https://△△△) or
phone numbers in the c-mail message text.
C-mail safety block is valid by default. Cancel the setting if
you want to receive c-mails that include URLs and phone
numbers in the message text.

Creating and Sending C-mail Messages

When the standby screen is displayed, hold down
L for at least one second.
Use j to select Create New and then press
➡
c (Select).
Enter text and then press c (OK).
➡
Use j to select
➡
c (Edit).
Use j to select Quote Adrs Book and then
➡
press c (OK).
34
[Address] and then press
Use a to select a phone book entry and then
➡
press c (Detail).
Use j to select a phone number and then
➡
press c (Select).
Press & (Send).
➡

Reading Received C-mail Messages

When you receive a c-mail message, C-mail
appears on the standby screen.
Use s to select C-mail and then press
➡
c (Select).
Press c (Select).
➡
• : Indicates a read message.
• : Indicates an unread message.
Use j to select the new message and then
➡
press c (View).
■ Reading a C-mail Message from the C-mail Menu
When the standby screen is displayed, hold down L for
at least one second to display the C-mail menu, use j to
select Inbox and then press c (Select).
For subsequent operations, see "Reading Received C-mail
Messages" above.