ATTENTION RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR IMPORTANT SAFETY INSTRUCTIONS When using electronic device, basic precautions should always be taken, including the following: Read all instructions before using the product. Do not use this product near water (e.g., near a bathtub, washbowl, kitchen sink, in a wet basement, or near a swimming pool, etc.).
PEQ-5B Parametric Equalizer With its advanced state-of-the-art features and versatile utility, the PEQ-5B five-band parametric equalizer is a rugged work- horse, designed for long-haul reliability in the studio and live sound reinforcement applications. •15dB boost/cut per band • Constant-Q, state-variable filter circuitry for precision control of tone coloration •...
To ensure years of enjoyment from your NADY AUDIO PEQ-5B Parametric Equalizer, please read and understand this manual thoroughly before using the unit. 1. Inspection Your NADY AUDIO PEQ-5B was carefully packed at the fac- tory in packaging designed to protect the units in shipment.
5. MASTER LOW CUT CONTROL Use this control to adjust the lower cutoff frequency of the PEQ-5B. The high pass filter can be tuned from 10 to 400 Hz. In the 10 Hz position the signal passes unchanged. 6. MASTER HIGH CUT CONTROL Use this control to adjust the upper cutoff frequency of the unit.
Connect a short ground wire from this screw to the grounding point for all connecting equipment in your rack (see also sec- tion A 6 above: Chassis Grounding). INPUTS TIP/PIN 2 RING/PIN 3 SLEEVE/PIN 1 NADY SYSTEMS, INC. Emeryville, CA USA...
With a variable bandwidth ranging from 0.03 to 2 octaves, the PEQ-5B is the most flexi- ble equalizer available. It is totally superior to graphic equal- izers in all ways, and for almost all applications, from post- production in audio, video and broadcast studios to on stage use.
31 or 15 band equalizers. In live sound situations, for example, the graphic EQ can be used for the rough mix and the PEQ-5B can be used to help fine tune the overall sound.
PEQ-5B to be most effective.) 3. Inserting the PEQ-5B in the Signal Path The PEQ-5B can be inserted in the signal path at different points, depending on the setup and application of your sys- tem. For example, it can be inserted in the line inserts of your mixer, sub-group inserts, effects paths, or between signal processors and mixer or power amps, and so on.
Page 12
DO NOT ATTEMPT TO SERVICE THIS UNIT YOURSELF AS IT CAN BE DANGEROUS AND ALSO WILL VOID THE WARRANTY. NADY SYSTEMS, INC. • 6701 SHELLMOUND STREET, EMERYVILLE, CA 94608 Tel: 510.652.2411 • Fax: 510.652.5075 • www.nadywireless.com...
Need help?
Do you have a question about the PEQ-5B and is the answer not in the manual?
Questions and answers