Operations During A Call; Call Transfer; Preset Dial; Voice Dial Activation - Sony MEX-BT2950 Operating Instructions Manual

• The call history may not change even if cellular
phone's call history is deleted.
Calling by phone number input
1 Press (SOURCE/OFF) repeatedly until "BT
PHONE" appears.
2 Press and hold (MODE).
3 Rotate the control dial to select the phone
number, and lastly select " " (space).
4 Press (handsfree).
The phone call starts.
Note
"_" appears instead of "#" on the display.
Calling by preset number
You can store up to 6 contacts in the preset dial.
For details on how to store, see "Preset dial"
(page 20).
1 Press (SOURCE/OFF) repeatedly until "BT
PHONE" appears.
2 Press a number button ((1) to (6)) to select
the contact you want to call.
3 Press (handsfree).
The phone call starts.
Calling by redial
1 Press (SOURCE/OFF) repeatedly until "BT
PHONE" appears.
2 Press and hold
The phone call starts.

Operations during a call

Presetting the volume of the ringtone
and talker's voice
You can preset the volume level of the ringtone
and talker's voice.
To adjust the ringtone volume:
Rotate the control dial while receiving a call.
Ringtone volume can be adjusted.
To adjust the talker's voice volume:
Rotate the control dial during a call. The talker's
voice volume can be adjusted.
Note
If the Bluetooth Phone source is selected, rotating the
control dial will only adjust the talker's volume.
Mic Gain adjustment
You can adjust the volume for other party. Press
(5) to adjust the volume levels ("MIC-LOW,"
"MIC-MID," "MIC-HI").
Note
Configurable during a call.
20
(handsfree).
EC/NC Mode (Echo Canceller/Noise
Canceller Mode)
You can reduce echo and noise.
Press and hold (5)/ to select to "EC/NC-1" or
"EC/NC-2."
Note
Configurable during a call.

Call transfer

In order to activate/deactivate the appropriate
device (this unit/cellular phone), check the
following.
1
Press (MODE) or use your cellular
phone.
For details on cellular phone operation, refer to
your cellular phone manual.
Note
Depending on the cellular phone, handsfree
connection may be cut off when call transfer is
attempted.

Preset dial

Contacts (up to 6) in the phonebook of a cellular
phone can be stored in the preset dial.
1
Press (SOURCE/OFF) repeatedly until
"BT PHONE" appears.
2
Press and hold a number button ((1)
to (6)) to select the preset number to
store.
"P (preset number) WAITING" appears.
3
Send the phonebook data by
operating the cellular phone.
The contact is stored in the selected preset
number.

Voice dial activation

You can activate voice dialing with a cellular
phone connected to this unit by saying the voice
tag stored on the cellular phone, then make a call.
1
Press (SOURCE/OFF) repeatedly until
"BT PHONE" appears.
2
Press (handsfree).
"VOICE DIAL" appears.
3
Say the voice tag stored on the cellular
phone.
Your voice is recognized, and the call is
made.
Notes
• Check that the unit and cellular phone are
connected beforehand.
• Store a voice tag on your cellular phone beforehand.