Cook Top/Microwave Drawer Disassembly - Sharp KB-5121KS Service Manual

KB-5121KS/K/W
COOK TOP / MICROWAVE DRAWER DISASSEMBLY
WARNING: Follow all safety precautions beginning on Page 2 before proceeding!
CAUTION: Before performing any of the disassembly, disconnect the power source!
1. Before removing Control Panel, take measures to protect the
Cook Top surface and keep Microwave Drawer open
to prevent scratches.
2. Remove all Control Knobs (Fig 1).
3. Unscrew all Retainers (Fig 1).
4. Unscrew Glass Key Deco screw (1) (Fig 1).
5. Carefully lift Glass Key Deco and unhook
Indicator Lamp from Lens (Fig 1).
6. Remove all screws from Control Panel Mold (Fig 2).
7. Slide Control Panel Mold to left (to unlock) and lift (Fig 2).
8. Remove Gasket from Key Fixing Angle (Fig 3).
unscrew (4) screws holding key fixing mold.
9. Lift Key Fixing Mold and carefully unhook all Molex's,
ground wire and C/P wiring (Fig 3).
NOTE: When reassembling, it is very important
that all Cook Top wires are tucked under the
Microwave cavity lip and secured with the RED
WIRE STRAP. The 240v harness can create
noise that can interfere with C/P function
(example: intermittent or no keyboard operation).
Glass Key Deco
Indicator Lamps
Gasket
Key Fixing Angle
32
Fig. 1
GND Deco Screw
Lens
Fig. 2
Fig. 3