Surface Cooking; Panel Light (Select Models); Cooktop; Bunler Grates - Maytag CRG9830 Instruction Manaul

SURFACE COOKING
Panel Light {select models) Sealed Burners
The panel light is turned on by"pushing tile rocker The sealed burners of your range are secured to the
switch on the control panel. It may be turned off by cooktop and are not designed to be removed.
pushing the other side of the switch.
Since the burners are sealed into the cooktop, boilovcrs
or spills won't seep underneath the cooktop. However,
burner caps should be cleaned alter each use. A soiled
burner may result in improper ignition or uneven flame.
Your range features two special Power Burners
located in the left rear and right front positions.
(NOTE: Model CHC9830 features one Power Burner
Cooktop located in the front position.) These offer higher speed
eooking that can be used to quickly bring water to a boil
To prevent discoloration, dean cooktop after each use. and for large-quantity cooking.
Wipe acid or sugar spills as soon as the eooktop has
cooled as these spills may discolor or etch the porcelain, r |
The eooktop on gas ranges with sealed burners is
|
POWERBURNER
l
standarddesigned with two eontoured wells whieh contain spills. ] _Uniike gasarange with I_ ]burners, this L
cook/up does not lift-
up nor is it removable.
To prevent damage to the / _ BURNER
range, do not attempt to
lift the cooktop for any ---
reason.
Pilotless Ignition
Be sure all surface controls are set in the OFF position
Burner Grates
prior to supplying gas to the range.
Your range is equipped with a pilotless ignition system
which eliminates the need for a constant standing pilot
light. Each surface burner has a spark ignitor. When
cleaning around the surface burner, use care, If a dean-
ing cloth should catch the ignitor, it could damage it.
The burner grates must be _- _
properly positioned
before
_AP
cooking. When reinstalling the
grates, place the indented sides
together so the straight sides are
at the front and rear. Improper
PORTS,,._ _.-- - - _
installation of the grates
may
_IGNITOR
result in chipping of the cooktop.
PORTBELOWIGNITOR
Although the burner grates are durable, they will
gradually lose their shine clue to high temperatures.
NOTE: The surface burner will not light if the ignitor is
damaged, broken, soiled or wet. Also, the burner will
not light if the small port beneath the ignitor is blocked.
See page 15 for cleaning instructions.
PAGE 6