This unit was developed using the expertise of professional sound engineers and working musicians. You will find that your new PMX-420 powered mixer has superior performance and greater flexibility than any other powered mixer in its price range. Please read this manual carefully to get the most out of your new unit.
IMPORTANT SAFETY INSTRUCTIONS When using this electronic device, basic precautions should always be taken, including the following: Read all instructions before using the product. Do not use this product near water (e.g., near a bathtub, washbowl, kitchen sink, in a wet basement, or near a swimming pool, etc.).
[Please note: Nady Systems is not responsible for shipping damage. If your unit is damaged, do not return to Nady, but notify your dealer and the shipping company (if shipped to you) immediately to make a claim. Such claims must be made by the consignee in a timely manner.]...
C O N T R O L S A N D C O N N E C T I O N S (1) CHANNEL 1 & 2 INPUTS These electronically balanced XLR inputs are designed to accept signals from any balanced or unbalanced low impedance (Low Z) microphone.
C O N T R O L S A N D C O N N E C T I O N S bus or the internal DSP Echo Effects. The channel Effects Send control is mono, post-EQ, and post-Ch Volume meaning the signal level sent to the Effects Send bus will be affected by the Channel Volume Control (11) setting.
Submix 1 & 2 Outputs (30). These faders are post Submix 1 & 2 Send/Return Inserts (29) and will control any signal returning to the PMX-420 via those jacks. The Submix signal can also be selected for the Headphone Output (26) for easy monitoring.
Replace with only the same type fuse. If the fuse blows continuously, have the unit serviced by qualified personnel. The PMX-420 powered mixer uses 20mm glass tube Fast Blow fuses: 5A 250V for 115VAC, 2.5A 250V for 230VAC. (39) AC VOLTAGE SELECTOR SWITCH...
C O N N E C T I O N S 8Ω 8Ω 8Ω 8Ω MONITOR SPEAKERS & POWER AMP REVERB / EFX REVERB / EFX PA or RECORDING DEVICE PLAYER POWERED SUB PA or RECORDING TAPE/CD/MP-3 PLAYER DEVICE COMPRESSOR...
1. INPUTS Input CHANNEL 1-2 XLR BALANCED CHANNEL 1-2 1/4” UNBALANCED CHANNEL 3-4 Mono 1/4” UNBALANCED CHANNEL 3-6 STEREO 1/4” & RCA UNBALANCED EFFECTS RETURN 1/4” UNBALANCED SUB INSERT RETURNS 1/4” UNBALANCED RING MAIN INSERT RETURNS 1/4” UNBALANCED RING Sensitivity measured for max power with all volumes at max, EQ’s at mid Maximum Input Level measured with Gain set to min 2.
Page 12
DO NOT ATTEMPT TO SERVICE THIS UNIT YOURSELF AS IT CAN BE DANGEROUS AND WILL ALSO VOID THE WARRANTY. NADY SYSTEMS, INC. • 6701 SHELLMOUND STREET, EMERYVILLE, CA 94608 Tel: 510.652.2411 • Fax: 510.652.5075 • nady.com...