Change Settings; General (Sleep, Standby; Picture; Sound - Philips DVP2800 User Manual

Hide thumbs Also See for DVP2800:
Table of Contents

Advertisement

Available languages

Available languages

3 Change settings

This section helps you change the settings of
this player.
1
2
Disc
Setup
Unlock
Disc Lock
General
OSD Language
English
3
Sleep Timer
Off
Video
Auto Standby
On
Audio
Preference
Note
You cannot change a menu option that is grayed out.
To access [Preference], stop the disc play.
To return to the previous menu, press . To exit the
menu, press
.

General (sleep, standby...)

1
Press .
2
Select [Setup] > [General] to access the
general setup options.
[Disc Lock]: Lock or unlock a disc for play.
To play a locked disc, you need to input
your password: press
to enter a
digit, and press
/
to change a digit
position. The default password is "136900".
[OSD Language]: Select a language for on-
screen menu.
[Sleep Timer]: Set a period of time for this
player to switch automatically to standby
mode from play.
[Auto Standby]: Enable or disable auto
standby. If enabled, this player switches
automatically to standby after 15 minutes
of inactivity (for example, in pause or stop
mode).
EN

Picture

1
Press .
2
Select [Setup] > [Video] to access the
video setup options.
[TV System]: Select a TV system that
matches your TV. By default, this setting
matches the common TVs in your country.
[Aspect ratio]: Select a picture display
format to fit the TV screen.
[Picture Setting]: Select a predefined color
setting, or customize a setting.
[Closed Caption]: Enable this feature
to show the sound effects in subtitles.
Applicable only when both a disc and a TV
support this feature.

Sound

1
Press .
2
Select [Setup] > [Audio] to access the
audio setup options.
[Analogue Output]: Select an audio format
for sound output when this player is
connected through the AUDIO OUT L/R
connectors.
[Digital Audio]: Select an audio format
for sound output when this player is
connected through the COAXIAL
connector.
[Digital Output] - Select a type of
digital output: [Off] - Disable digital
output; [All] - Support multi-channel
audio formats; [PCM Only] - Downmix
to two-channel audio signal.
[LPCM Output] - Select a LPCM
(Linear Pulse Code Modulation)
output sampling rate. The higher the
sampling rate, the better the sound
quality. [LPCM Output] is enabled only
when [PCM Only] is selected under
[Digital Output].
[Volume]: Change a volume level.
Page 10

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvp2800/f7

Table of Contents