One-Stage Cooking; Multi-Stage Cooking; Using The +30S Button - Samsung AME0114MB Owner's Instructions & Cooking Manual

ONE-STAGE COOKING

For simple one-stage cooking, you only need to set a cooking time. The power level is
automatically set to High. If you want to set the power to any other level, you must set it
using the MWO Power level button.
1. Use the Number buttons to set a cooking time. You can set
a time from one second to 99 minutes, 99 seconds. To set a
time over one minute, enter the seconds too. For example,
to set 20 minutes, enter 2, 0, 0, 0.
2. If you want to set the power level to something other than
High, press the MWO Power level button, then use the
Number buttons to enter a power level.
Power Levels
0 = PL:0
1 = PL:10
2 = PL:20
3 = PL:30
4 = PL:40
5 = PL:50
3. Press the Start button to begin cooking. If you want to
change the power level, press the Stop/Cancel button
before you press the Start button, and re-enter all of the
instructions.
Some recipes require different stages of cooking at different temperatures. You can set
multiple stages of cooking with your microwave.
AME0114MB_XAP_DE68-03752U-01_EN.indd 15
(Deodorization) 6 = PL:60 (Simmer)
(Warm) 7 = PL:70 (Medium high)
(Defrost) 8 = PL:80 (Reheat)
(Low) 9 = PL:90 (Sauté)
(Medium low) 10 = PL:Hi (High)
(Medium)
English - 15

MULTI-STAGE COOKING

1. Follow steps 1 and 2 in the "One-Stage Cooking" section on
page 15 for further details.
When entering more than one cooking stage, the MWO
Power level button must be pressed before the second
cooking stage can be entered.
2. Use the Number buttons to set a second cooking time.
3. Press the MWO Power level button, then use the Number
buttons to set the power level of the second stage of
cooking.
4. Press the Start button to begin cooking.
You can check the Power Level while cooking is in progress
by pressing the MWO Power level button.

USING THE +30S BUTTON

You can increase the cooking time by pressing the +30S button once for each 30
seconds to be added.
1. Press the +30S button once for each 30 seconds to be
added.
Add 30 seconds to a program in progress by pressing the
+30S button for each 30 seconds you want to add.
2. Press the Start button.
It only work in MWO, except all Auto Cook & Health Cook
mode.
2014-06-19 10:09:31