Parts Names - Sanyo VCC-6580 Instruction Manual

PARTS NAMES

1 4
2
3
6
5
3
English
1
Power indicator (POWER)
Comes on when the power to the camera is on.
2
Video output connector (VIDEO OUT: BNC type)
Connect this connector to a device such as a monitor, digital video recorder or time-lapse VCR with a VIDEO
IN connector.
3
AC power cord
4
Line phase adjustment volume (LINE PHASE)
When using two cameras or more, the image on the monitor may roll vertically when switching sources. This
rolling can be minimized by turning this volume.
5
Lens iris output connector (LENS)
This 4-pin connector is used to send the DC control signal and power supply to an auto-iris type lens.
6
Camera setup section (under the cover)
To access the controls, remove the cover fixing screw, then remove the cover.