Channel-Specific Bits 2 - Siemens SINUMERIK 840C Installation Manual

09.95
1.9.1

Channel-specific bits 2

• Channel-specific axis and spindle assignment for multi-channel display (up to SW 4)
• Channel-specific axis and spindle assignment for single and multi-channel display (as from
SW 5)
MD No. 7
9000
to
9005
Axis 8 Axis 7
9020
to
9025
Axis 16 Axis 15
9040
to
9045
Axis 24 Axis 23
9060
to
9065
9100
to
9105
9140
9141
9142
9143
Toggle output Toggle output
916*
bit 7 on bit 6 on
emergency emergency
2)
retract retract
918*
2)
920*
2)
922* Input bit 7 Input bit 6
triggers triggers
2)
retraction retraction
Note:
• Applies if option "multi-channel display" has been set
• From SW 5 also applies to single-channel display with NC-MD 5053, bit 0 = 1
• Default value: 0
• Channel 5 and 6 from SW 4
_______
1) Up to SW 2
2) SW 4 and higher
© Siemens AG 1992 All Rights Reserved
SINUMERIK 840C (IA)
Bit No.
6 5 4
Display channel 1 to 6
Axis 6 Axis 5
Display channel 1 to 6
Axis 14 Axis 13
Display channel 1 to 6
Axis 22 Axis 21
Display channel 1 to 6
Axis 30 Axis 29
Display channel 1 to 6
Spindle 6 Spindle 5
Toggle output Toggle output
bit 5 on bit 4 on
emergency emergency
retract retract
Input bit 5 Input bit 4
triggers triggers
retraction retraction
6FC5197- AA60
1 NC/Drive Machine Data
1.9.1 Channel-specific bits 2
3 2 1
Axis 4 Axis 3 Axis 2
Axis 12 Axis 11 Axis 10
Axis 20 Axis 19 Axis 18
Axis 28 Axis 27 Axis 26
Spindle 4 Spindle 3 Spindle 2
Toggle output Toggle output Toggle output
bit 3 on bit 2 on bit 1 on
emergency emergency emergency
retract retract retract
NC-contr. ext.
zero sp. +
retr.
EMERGENCY
STOP triggers
retract.
Input bit 3 Input bit 2 Input bit 1
triggers triggers triggers
retraction retraction retraction
0
Axis 1
Axis 9
Axis 17
Axis 25
Spindle 1
Channel
with
1)
FIFO
Channel
with
1)
FIFO
Channel
with
1)
FIFO
Channel
with
1)
FIFO
Toggle output
bit 0 on
emergency
retract
Trigger alarm
+ mode group
stop on error
Mode gr. stop
triggers
retract.
Input bit 0
triggers
retraction
1–35