Disconnect The Headset From The Phone - Nokia HS-26W User Manual

HS-26W_KP_9241016.fm Page 11 Tuesday, August 2, 2005 11:19 AM
3. Select the headset from the list of found devices.
4. Enter the passcode 0000 to pair and connect the headset to your phone. In
some phones you may need to make the connection separately after pairing.
See the user guide of your phone for details. You only need to pair the headset
with your phone once.
5. If the pairing was successful, the headset beeps and appears in the phone menu
where you can view the currently paired Bluetooth devices.

Disconnect the headset from the phone

You can disconnect the headset from your phone if you want to connect the phone
to another Bluetooth device.
The headset can be disconnected in the following ways:
• Switch off the headset.
• Disconnect the headset in the Bluetooth menu of the phone.
• Move the headset more than 10 meters (33 feet) away from the phone.
You do not need to delete the pairing with the headset to disconnect it.
Reconnect the paired headset to your phone
To connect the headset to your phone, switch on the headset and make the
connection in the Bluetooth menu of your phone; or press and hold the answer/end
key.
You can set your phone to connect with the headset automatically when the
headset is switched on. To do this in Nokia phones, change your paired device
settings in the Bluetooth menu.
G e t s t a r t e d
11