Sound Adjustment; Adjusting The Sound; Selecting The Preset Effect; Adjusting The Graphic Equalizer Or Selecting The Surround Effect - Sony MHC-GNX600 Operating Instrction

Sound Adjustment

Adjusting the sound

You can reinforce the bass and create a more
powerful sound.
Press GROOVE repeatedly.
Each time you press the button, the display
changes cyclically as follows:
GROOVE ON* t GROOVE OFF
* The volume switches to power mode and the
equalizer curve changes.
Tips
• The default setting is "GROOVE ON".
• When "GROOVE ON" is selected,
"GROOVE" lights up in the display.
Selecting the preset
effect
Press PRESET EQ (or EQ on the remote)
repeatedly to select one of the following
preset effect.
Effect
ROCK
POP
JAZZ
DANCE
SOUL
TECHNO
HIP HOP
REGGAE
SAMBA
CLASSICAL
FLAT
USER EQ 1
USER EQ 2
USER EQ 3
To cancel the preset effect
Press PRESET EQ (or EQ on the remote)
repeatedly until "FLAT" appears in the display.
GB
18
Category
Standard music sources
Original music source
User equalizer setting
Adjusting the graphic
equalizer or selecting the
surround effect
You can adjust the sound by raising or lowering
the level of specific frequency band, then store
up to three user equalizer setting in the memory.
1
Press EQ BAND/MEMORY.
Frequency band
GROOVE
2
Turn and hold . OPERATION DIAL
> clockwise or counterclockwise
and release it when you reach the level
or surround effect you want.
3
Repeat step 1 and 2 to adjust the level
of frequency band "MID".
4
Repeat step 1 and 2 to adjust the level
of frequency band "HIGH".
5
Repeat step 1 and 2 to select the
surround effect.
6
Press EQ BAND/MEMORY.
"MEMORY EQ-1" appears in the display.
7
Turn and hold . OPERATION DIAL
> clockwise or counterclockwise
and release it when you reach the user
equalizer number (1~3) you want to
store the equalizer setting.
8
Press EQ BAND/MEMORY.
This setting is automatically stored as the
user equalizer setting you selected in step 7.
The previous setting stored at this memory
location is erased and replaced by the new
setting.
Tip
If you do not want to store the equalizer setting, select
"EXIT" in step 7.
Frequency level
A B