Signal Indicator - Asus RP-AC68U Quick Start Manual

3. The Wi-Fi LEDs flash for about two (2) minutes and then turn
solid light, which indicates that the Repeater has connected
to the wireless network successfully. The Repeater's wireless
network name (SSID) changes to your existing Wi-Fi network
name, ending with _RPT or _RPT5G. For example:
Existing Wi-Fi network name: existing NetworkName
New Repeater 2.4GHz network name: existing Networ-
kName_RPT
New Repeater 5GHz network name: existing Networ-
kName_RPT5G
To connect an additional Wi-Fi device to your Repeater net-
work, use the same network password as that of your existing
wireless router.
Move the Repeater
When the connection is complete, locate the Repeater between
the router/AP and the wireless device to get better performance.
After placing your RP-AC68U in an ideal location, RP-AC68U
connects to your router/AP in about one (1) minute.
NOTES:
• Place your RP-AC68U between your router/AP and wireless
device to get the best repeater performance.
• Place your RP-AC68U in a location where you can get at least
two (2) Wi-Fi LEDs on.
IMPORTANT!
• T o minimize interference, keep RP-AC68U away from devices
like cordless phones, Bluetooth devices and microwave ovens.
• W e recommend that you place your RP-AC68U in open or
spacious location.

Signal Indicator

• To get the best performance, place the Repeater between
your router/AP and wireless device.
• The Wi-Fi signal indicators indicate the connection perfor-
mance of the Repeater with the parent AP. Refer to section A
Quick Look for the location of the Wi-Fi LED indicators.
Wi-Fi signal LED indications
Number of lit Wi-Fi
signal bars
Connection quality with
the parent AP
Excellent
Good
Poor
5