Subscribe to Our Youtube Channel
Related Manuals for N-Tron 102RAS
Summary of Contents for N-Tron 102RAS
-
Page 1: Remote Access Server
102RAS Industrial Remote Access Server User Manual & Installation Guide (Revised 2010-11-15) page 1 of 30... -
Page 2: Table Of Contents
Call Log ... 23 Current Status - System ... 24 Current Status – POTS modem 1 ... 25 Modem Setup ... 25 Authentication ... 26 KEY SPECIFICATIONS ...28 REGULATORY APPROVALS ...29 N-TRON Limited Warranty ...30 (Revised 2010-11-15) page 2 of 30... -
Page 3: Industrial Remote Access Server Installation Guide
The N-TRON 102RAS provides connectivity to an industrial LAN for telecommuters or mobile users, or to remotely installed equipment, via an integrated V.92/56K modem. The small size of the 102RAS makes it ideal for placing alongside other industrial equipment to be accessed remotely. Product Features LAN Port: 10/100BaseT;... -
Page 4: General Safety Warnings
In no event shall N-Tron Corp. be liable for any incidental, special, indirect or consequential damages whatsoever included but not limited to lost profits arising out of errors or omissions in this manual or the information contained herein. -
Page 5: Environmental Safety
Environmental Safety WARNING: Disconnect the power and allow to cool 5 minutes before touching. Electrical Safety WARNING: Disconnect the power cable before removing any modules, or any enclosure panel. WARNING: Do not operate the unit with the cover removed. WARNING: Properly ground the unit before connecting anything else to the unit. Units not properly grounded may result in a safety risk and could be hazardous and may void the warranty. -
Page 6: Installation
9. This apparatus is suitable for use in Class I, Div 2, Groups A, B, C, and D, or unclassified or nonhazardous locations only. Package Contents Please make sure the 102RAS Remote Access Server package contains the following items: 1. 102RAS Remote Access Server 2. Product CD Contact your carrier if any items are damaged. -
Page 7: Din Rail Mounting
35mm DIN rail. However, DIN rail mounting may not be suitable for all applications. Our Universal Rack Mount Kit (P/N: URMK) may be used to mount the 102RAS to standard 19" racks as an option. products page 7 of 30... - Page 8 Lit when carrier is detected by 102RAS. Lit when data is being transmitted by 102RAS. Lit when data is being received by 102RAS. Phone Interface The 102RAS provides an RJ-11 phone line interface to connect to a standard wall outlet. (Revised 2010-11-15) page 8 of 30...
-
Page 9: Applying Power (Top View)
DC Voltage sources. This device draws current from both sources simultaneously. Use 16-28 gauge wire when connecting to the power supply. Recommended 24V DC Power Supplies, similar to: N-Tron’s P/N NTPS-24-1.3, 24VDC at 1.3A (Revised 2010-11-15) - Page 10 Some N-Tron switches have metal din-rail brackets that can ground the switch if the din-rail is grounded. In some cases, N-Tron switches with metal brackets can be supplied with optional plastic brackets if isolation is required.
-
Page 11: Rj45 Connector Crimp Specifications
RJ45 CONNECTOR CRIMP SPECIFICATIONS Please reference the illustration below for your Cat5 cable specifications: (Revised 2010-11-15) page 11 of 30... -
Page 12: Overview Of Features
Modem Sharing mode, computers with network access to the 102RAS can use Telnet on port 7000 and get direct access to the modem in the 102RAS. More commonly a com port redirector can be installed on the workstation(s). A redirector adds a virtual communication port to Windows and uses Telnet to map (redirect) the com port to the modem. -
Page 13: Troubleshooting
Verify that Link LED’s are ON for connected ports. Verify cabling used between stations. Verify the phone socket that the phone line from the 102RAS is plugged into is operational. Verify that cabling is Category 5E or greater for 100Mbit Operation. -
Page 14: Regulatory Statments
7. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information. 8. No repairs are to be made by you. Repairs are to be made only by N-Tron Corp. or its licensees. Unauthorized repairs void registration and warranty. - Page 15 This equipment is not capable under all operating conditions of correct operating conditions of correct operation at the higher speed which it is designated. 33.6 kbps and 56 kbps connections are likely to be (Revised 2010-11-15) N-Tron Corp. 102RAS 102RAS AU7USA-25814-M5-E 0.3B...
-
Page 16: Telecom Approvals For The Embedded Modem - Model Number 5634Smi
restricted to lower bit rates when connected to some PSTN implementations. Telecom will accept no responsibility should difficulties arise in such circumstances. 2. Immediately disconnect this equipment should it become physically damaged, and arrange for its disposal or repair. 3. This modem shall not be used in any manner which could constitute a nuisance to other Telecom customers. - Page 17 China China NALTE Cyprus Czech Republic Denmark Estonia Finland France Germany Greece Hong Kong Hungary Iceland India Indonesia Ireland Israel Italy Japan Korea Latvia Liechtenstein Lithuania Luxembourg Malta Mexico Netherlands New Zealand Norway Philippines Poland Portugal Russia Telecom Russia Safety Singapore Slovakia Slovenia...
-
Page 18: Software Configuration
Software Configuration Web Management Enter the switch’s IP address in any web browser and login to the web management feature of the 102RAS. Default: Username: admin Password: admin (Revised 2010-11-15) page 18 of 30... -
Page 19: Web Management - Home
When the administrator first logs onto the 102RAS, the default home page is displayed. At the top of the screen there is a list of configurable settings which the 102RAS supports. This section of the manual will go through each choice listed at the top of the screen and explain how to configure those settings. In the center of the main home page the administrator/user can see some basic information like what firmware revision the 102RAS is running. -
Page 20: Web Management - Menu Structure
Web Management – Menu Structure Home Shows information about the manufacturer and the 102RAS, along with support Website and E-Mail addresses. Login Brings up the Login page Logout Logs off the current user Administration – Shows the current IP Configuration and allows User to change. -
Page 21: Administration - Ip Configuration
4) If the SMTP Server requires a password, enter the password in the “SMTP Password” field. 5) If you enter a password, retype the identical password in the “Retype SMTP Password” field 6) Click on Update. At this point the 102RAS will send the Administrator an e-mail saying that the mail server has been updated. -
Page 22: Administration - Time Configuration
Note: By default, the 102RAS receives the date and time via Time Server via an internet connection. In the event the Local LAN (where the 102RAS is installed) does not have access to the internet, you must enter the IP Address of a Server on the Local LAN that has a Network Time Protocol (NTP) service enabled in order to have correct date and time recorded in the log. -
Page 23: Call Log
Note: The first row is for the “Administrator” function. No matter what values are used for the Name, User ID and Password fields, the first row will apply to the person doing the Administrator function for the 102RAS. The Administrator is the party privileged to configure the 102RAS. Call Log The Call Log screen displays the parameters you can set for the Call Log entries and displays a call log entry for each call. -
Page 24: Current Status - System
It will attempt contact with the standards web site 5 times in 20 seconds. If contact fails, it will try 5 times again 5 minutes later. If contact succeeds, the 102RAS will update its stamping time periodically per an interval set in the Administration screen. -
Page 25: Current Status - Pots Modem 1
Country Code Number of rings to answer on If you are using the 102RAS for dial-in PPP access (default usage), you do not have to modify the modem usage, but you do have to select the Country Code. (Revised 2010-11-15) -
Page 26: Authentication
If you are using your 102RAS for dial-out, you will have to select one of the Modem Sharing options and select the Country Code. With any of the Modem Sharing options, the TCP port number used to access the modem is 7000. - Page 27 If you are setting up the 102RAS to use Radius authentication, then: 1) Enter the IP address of the primary RADIUS Server in the RADIUS Server Address 1 field. 2) Enter the port number (usually port 1812) for the RADIUS Server in the top Port field.
-
Page 28: Key Specifications
KEY SPECIFICATIONS Physical Height: 3.40" (8.64cm) Width: 1.50" (3.81 cm) Depth: 3.60" (9.14 cm) Including DIN-Rail Mount: 4.32” (10.9 cm) Weight: 0.70 lbs (0.32 kg) DIN-Rail: 35mm Electrical Redundant Input Voltage: 10-30 VDC (Regulated) Input Current: 221 mA at 24VDC (Steady State) Inrush Current: 7.4 A /0.7 ms at 24VDC Input Ripple:... -
Page 29: Regulatory Approvals
Ed. (EFT) IEC 61000-4-5 2 Ed. (Surge) IEC 61000-4-6 Ed. 2.1 (Conducted Disturbances) GOST-R Certified. Warranty: Effective January 1, 2008, all N-TRON products carry a 3 year limited warranty from the date of purchase. (Revised 2010-11-15) page 29 of 30... -
Page 30: N-Tron Limited Warranty
Responsibility for loss or damage does not transfer to N-TRON until the returned item is received by N-TRON. The repaired or replaced item will be shipped to the customer, at N-TRON’s expense, not later than thirty (30) days after N-TRON receives the product.
Need help?
Do you have a question about the 102RAS and is the answer not in the manual?
Questions and answers