Download  Print this page

Mustek LM-3000 User Manual

Mustek user's manual lcd monitor lm-3000
Hide thumbs

Advertisement

LM-3000
LCD MONITOR
USER'S MANUAL

Advertisement

loading

  Related Manuals for Mustek LM-3000

No related manuals

  Summary of Contents for Mustek LM-3000

  • Page 1 LM-3000 LCD MONITOR USER’S MANUAL...
  • Page 2: Fcc Notice

    ABOUT THIS MANUAL This manual assists the user to install and to utilize the LM-3000 which is a 12.1” high luminance LCD DSTN display system. The manufacturer of the LM-3000 heartily apologizes to the user for reserving the right to change or to modify this manual without notice due to the rapid and constant progress and improvement on science and technology.
  • Page 3: Package Contents

    THIS MANUAL III. LCD PANEL INSTALLATION The LM-3000 LCD panel is delivered with a separate base. The user has to find a surface which is horizontal and flat enough to place the LCD panel with its supporting base on. Please always manage to...
  • Page 4 The attached PST032 is a PCI bus SVGA adaptor card which offers a 50 pin SCSI type connector for LM-3000 (Do not connect any device other than the LM-3000 LCD monitor to this port even if it was using a SCSI connector!) and a 3 x 5 D sub connector for external SVGA monitor.
  • Page 5: Cable Connection

    The user shall first press the two springs of the 50 pin SCSI type connector then connect the connector to the SVGA adaptor card and latch the connector. LM-3000 USER’S MANUAL - page 3...
  • Page 6: Utility Installation

    14. Click on Change System Settings or press C. 15. Click on Display or press ALT + D. 16. Select the intended video driver of proper resolution and colors then press ENTER. The names of the video drivers LM-3000 USER’S MANUAL - page 4...
  • Page 7 Continue choosing Close until asked to restart your machine from the "Systems Settings Change" dialog box. After the system has restarted, you can go back into the Display applet and select alternate screen resolutions and color depths. LM-3000 USER’S MANUAL - page 5...
  • Page 8 Technologies Video Accelerator driver will appear at the end of Models list box. Scroll to the end of the list box and double click on the driver. Once the installation is complete, the system must be shut down and restarted. LM-3000 USER’S MANUAL - page 6...
  • Page 9 Swivel : Tilt : Brightness : Contrast : LM-3000 USER’S MANUAL - page 7 without moving the base through a distance of 36 mm each side. The panel can be horizontally rotated, using the pivot on the base, 45° each way.
  • Page 10 Tilt Brightness control knob Contrast control knob Swivel LM-3000 USER’S MANUAL - page 8...
  • Page 11: Specification

    Swivel Range: Tilt Range: Slide Range: Total Width: Total Depth: Total Height: LM-3000 USER’S MANUAL - page 9 LM-3000 12.1 ” DSTN COLOR SVGA 800 x 600 247.02 (W) x 185.76 (H) mm 250 ms SIDE-EDGE TYPE CFL x 2 TUBES NON-GLARE TREATMENT 0.0821 (W) x 0.2863 (H) mm...
  • Page 12 Information in this document is subject to change without notice and does not represent a commitment on behalf of the manufacturer. LM-3000 USER’S MANUAL - page 10...