Questions And Answers - HP 245 G4 Maintenance And Service Manual

Table of Contents

Advertisement

Questions and answers

1.
How can the BIOS settings be restored (returned to factory settings)?
a.
Turn on or restart the computer and press
b.
Select File, then select Restore defaults.
c.
Follow the on-screen instructions.
d.
Select File, save changes and exit, then press Enter.
2.
What kind of configuration data is stored on the DIMM Serial Presence Detect (SPD) memory
module? How would this data be written?
The DIMM SPD memory contains information about the memory module such as size, serial number,
data width, speed/timing, voltage and thermal information. This information is written by the module
manufacturer and stored on an EEPROM. This EEPROM cannot be written to when the memory module is
installed in a PC. Third party tools do exist that can write to the EEPROM when the memory module is
not installed in a PC. There are various third party tools available to read SPD memory.
3.
Does the "Firmware Hub for System BIOS" contain the BIOS program? Is this chip writable, and if so
how?
The Firmware Hub does contain the BIOS program and is writable. A utility is required to perform the
write function.
4.
In some PC systems, the Firmware Hub for System BIOS is a flash memory chip so that updates can
be written by the customer. Is this true for these BIOS chips?
Yes, they are flash memory chips.
5.
What is meant by "Restore the nonvolatile memory found in Intel-based system boards"?
This relates to clearing the Real Time Clock (RTC) CMOS memory that contains PC configuration data.
6.
Does resetting the CMOS configuration memory return the PC back to factory defaults?
The process of resetting the CMOS will return certain system settings to factory default but will not reset
many of the system data and configuration defaults to their factory settings. To return these system
data and configuration defaults to factory settings, refer to question and answer 1 and follow the
instructions for returning the BIOS settings to factory defaults.
F10
when prompted near the bottom of the display.
Questions and answers 105

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents