Muse electronics Model Eleven Owner's Manual page 12

Disc Play – CD
To play a CD, first open the disc tray by pressing
"open" on the front panel. Place the disc in the
tray with the data side down (label up). Then
either press "open" on the front panel or
"Play/play" on either the remote or front panel to
begin play. The table of contents of the CD will
be read, and play will begin at the first track.
You can stop play at anytime by either opening
the tray by pressing "open" on the front panel or
by pressing "Stop/stop" on either the remote or
front panel.
CDs that have more than a single track can be
navigated between available tracks by using the
"Skip+/skip+" or "Skip-/skip-" buttons on either
the remote of front panel. Navigation within any
track can be accomplished by using the
"Search+" and "Search-" controls on the remote.
Disc play can be temporarily suspended by
pressing "Pause/pause" on either the remote or
front panel. Disc play can be resumed by
pressing "Play/play" on either the remote or front
panel.
With a CD playing in the Model Eleven,
information as to the track number and time in
track is displayed on the front panel.
"Display" control on the remote is pressed, the
display will change for time in track to time
remaining in track. If allowed in the setup menu,
the "Display" control will also display detailed
information on the disc on video device.
Information about the current and total number
of tracks, elapsed time in the current track, time
remaining in the current track and total disc
playing time is displayed.
A second press of the "Display" button on the
remote will cause the front panel to display the
remaining time of the entire disc.
device (if allowed in setup) will also now display
new information on the disc being played
including the elapsed time in play, the total
remaining time for the disc and the total playing
time of the disc.
A third press of the "Display" button on the
remote will cause the front panel display to
return to its initial configuration and will
extinguish the disc information on the video
device.
Pressing the "Menu" button on the remote while
playing a CD will cause the video device to
display the "Disc Navigator".
consists of a columnar listing of the tracks
numbers as well as the current track being
played.
cancel the OSD on the video device. During the
period when an OSD item is present, the front
panel of the Model Eleven will display GUI
(Graphical User Interface).
Pressing the "Repeat" button on the remote will
invoke a video display that allows for a number
of different play modes to be selected. Each of
the five submenus has a number of different
options.
If the
12
A subsequent press of "Display" will
The video
This navigator