Speaker Function - Motorola Advisor Manual

Speaker Function (Audible or Silent): The Speaker Function is used to
set the ADVISOR to either the audible mode or the silent mode of opera-
tion. If the speaker symbol ( õ ) is displayed in the lower left-hand corner
of the screen, the pager is in the audible mode; if no speaker is displayed,
the pager is in the silent mode.
To change the mode of operation, press the Function button, move the
cursor to the speaker symbol, then press the Function button again. The
pager either vibrates or chirps to indicate which mode the pager is in.
©©©À
É Ã » á Õ ë ¶ «
Function Menu Screen
21
í
A special reversed lock symbol ( ) replaces the arrow symbol in the
message-status screen.
When the cursor is not positioned on the locked message, the standard
lock symbol is shown.
When you read the first line of a locked message, the memory location
identifier is preceded by the lock symbol.
ë04:MR. SMITH WILL
ARRIVE AT 4:00 PM ON
FLIGHT 382.
Message with Lock Symbol
23
©©À
õ
9:05 AM 7/08/90
Audible Mode of Operation
©©À
9:05 AM 7/08/90
Silent Mode of Operation
©©©í
õ
9:05 AM 7/08/90
Message-Status Screen Showing
Reversed Lock Symbol
©©Àë
õ
9:05 AM 7/08/90
Locked Message with Standard Lock
22
The Lock Function: Up to 10 messages, or a total of 3200 characters,
can be "locked" to prevent them from being overwritten when memory is
full. To lock a message, press the Read button to display the message-
status screen. Use the Left or Right Directional Control button to position
the cursor on the memory location of the message you wish to lock.
Press the Function button to display the Function menu.
ë
Move the cursor to the lock symbol ( ), then press the Function button
again.
24
NOTE
Locked messages cannot be deleted or transferred to the Personal
Message file. You must unlock the message before transferring or
deleting it.
Unlocking a Message: To unlock a message, follow the same procedure
ï
used to lock it. An unlock symbol ( ) is shown in place of the lock symbol
in the Function menu.
Locking a Message While in the Read Mode: To lock a message while
in the read mode, press the Read button then position the cursor on the
memory location of the message you wish to read/lock.
Press the Read button to display the message.
©©©À
õ
9:05 AM 7/08/90
Message-Status Screen with Cursor
Positioned on Message to be Locked
©©©À
É Ã » á Õ ë ¶ «
Message-Status Screen with
Function Menu Displayed
©©©À
õ
9:05 AM 7/08/90
Message-Status Screen with Cursor
Positioned on Message to be Locked
ë04:MR. SMITH WILL
ARRIVE AT 4:00 PM ON
FLIGHT 382.
First Line of Message to be Locked