Download  Print this page

Kenwood KCA-WL100 Instruction Manual page 7

Wireless display adapter
Hide thumbs

Advertisement

Table of Contents
Operating a device using wireless connection
Operating a device using wireless connection
To display content from the Internet
You can display content from Internet using an Android device by
connecting the adapter to the access point.
• You need an access point (such as a device other than the Android
device connected via Wi-Fi with tethering activated) to use the
Internet.
1
Perform steps 1 to 3 in "To play content stored on the
Android device on the AV receiver" (Page 6) to
connect the device to the AV receiver via Wi-Fi.
2
Open the browser on the connected device and access
<http://192.168.49.1>.
The setting screen is displayed.
3
Touch the
icon.
The access point search screen is displayed.
4
Select "Scan" to display the available AP SSID (access
point) list, then select the AP SSID to use.
• Enter the password if required.
• When the connection is established...
– On the AV receiver: "Connected to AP" is displayed on the
AV receiver.
– On the Android device: The selected AP SSID is added to the
"Saved Access Points" list and "Connected" is displayed.
To change the password
You can change the password for connecting the Android device
with the adapter.
1
Perform steps 1 to 3 in "To play content stored on the
Android device on the AV receiver" (Page 6) to
connect the device to the AV receiver via Wi-Fi.
2
Open the browser on the connected device and access
<http://192.168.49.1>.
The setting screen is displayed.
3
Enter the password in the input area beside the
then select "Submit".
To switch the connection mode on the Android device
You can switch the connection mode between "Wireless Link" and
"Wireless Mirroring" from the Android device.
1
Perform steps 1 to 3 in "To play content stored on the
Android device on the AV receiver" (Page 6) to
connect the device to the AV receiver via Wi-Fi.
2
Open the browser on the connected Android device and
access <http://192.168.49.1>.
The setting screen is displayed.
3
Touch the
icon.
Each time you touch the icon, the connection mode is switched.
icon,
ENGLISH
7

Advertisement

Table of Contents
loading

  Related Manuals for Kenwood KCA-WL100