Samsung UE40C8790 User Manual page 40

Table of Contents

Advertisement

Available languages

Available languages

Advanced Features
Using the Timeshift Mode function
If you missed a live broadcast, you can see from the recorded broadcast using this feature.
When the Timeshift Mode is set to Auto, the TV stores the channel you watch currently to record automatically.
When the Timeshift Mode is set to Manual, if you press the � (Play) button, the TV stores the channel from the point of
view you want to record.
[
Recorded videos are DRM (digital rights management) protected and cannot be played on a PC or other TVs.
Note that files saved on the TV cannot be used after the main board is changed.
NOTE
x
We recommend using a USB HDD with at least 5 400 rpm, but a USB HDD of RAID type is not supported.
x
Data broadcasts cannot be recorded.
x
The availability of both recording and the Timeshift Mode function may differ depending on picture quality and the
free space on the hard disk drive.
x
If you press the ▲ or ▼ button, you can see the current channel being on air, or can see the start point the recorded
broadcast.
x
The Timeshift Mode operates for a maximum of 90 minutes.
x
After the Timeshift Mode function has run for the maximum time, the time information will be fixed to "00:00:00."
Note that if you have paused the recording the TV will automatically resume playback.
x
If the 5% free memory space limit of the USB storage device is reached, the current recording process will be closed.
x
When recording is performed by both the PVR (Personal Video Recorder) function and a device that supports the
HDMI-CEC feature, recording by the PVR function takes precedence.
x
During a playback or the Timeshift Mode, the picture will be displayed according to the display settings of the TV.
x
If you change the input source during recording, the screen will go blank until the change is completed.
x
An application which supports neither the recording nor the Timeshift Mode function will close automatically if you
try to use it during either function.
x
A message may appear in front of the application window indicating that the recording or the Timeshift Mode
function is closed.
x
Timeshift Mode function is not supported for analogue channels.
x
The recording and the Timeshift Mode functions are disabled for channels locked with Child Lock.
x
If the USB device has failed the Device Performance Test, the USB device must go through the Device Format and
Device Performance Test again before you record with the Guide or Channel Manager.
x
The recording and Timeshift Mode functions can only be used with a USB storage device that completed the
Device Performance Test.
x
If you attempt the recording or Timeshift Mode function with a device that did not have the Device Performance
Test, the function will not start.
x
If you press � (REC) on the remote control while the Channel Manager screen is being displayed or record with
Timer Recording, the TV may start or stop recording 1 or 2 seconds later than you intended due to the time needed
to process the command.
x
If a USB device dedicated to recording is connected, existing Timeshift Mode or recording files that were saved
abnormally will automatically be deleted.
x
If you switch to external input mode during recording, the recording will continue but the � (REC) button will be
disabled.
x
If any function that turns off the TV (Sleep Timer, Off timer, etc.) is set for a time that conflicts with recording, the TV
will be turned off once the recording is complete.
40
English
t

Advertisement

Chapters

Table of Contents
loading

Table of Contents