Operating Precautions - Sony rm-c950 Instructions For Use Manual

Precautions
Do not place the unit on an unstable base
The unit may fall, causing physical injury if used in any of
the following places:
• On top of a shaky, unstable table
• On inclined surfaces
• In places subject to vibration or shock
Check that the place of attachment is strong enough to
support the weight of this unit, and that the unit and
attachment device are secure.
Disconnect the DC/connection cable before
moving the unit
If the unit is moved with the DC/ connection cable still
attached, the cable may be damaged, resulting in fire.

Operating Precautions

Operating or storage location
Avoid operating or storing the unit in the following
locations:
• Extremely hot or cold places (Operation temperature:
–5°C to +45°C [23°F to 113°F])
• In direct sunlight for long periods, or close to heating
equipment (e.g., near heaters)
• Close to sources of strong magnetism
18
• Close to sources of powerful electromagnetic radiation,
such as radios or TV transmitters
Ventilation
To prevent internal heat buildup, do not block air
circulation around the unit.
Transportation
When transporting the unit, repack it as originally packed at
the factory or in materials equal in quality.
Cleaning
• Use a soft, dry cloth to clean the external surfaces of the
unit. If it is very dirty, use a soft cloth dampened with a
small quantity of neutral detergent, then wipe dry.
• Do not use volatile solvents such as alcohol, benzene or
thinners as they may damage the surface finish.
Precautions when connecting to a camera
Before connecting the DXC-950/950P/970MD camera to
the RM-C950, be sure to set the baud rate in the camera to
9600. You will not be able to adjust the baud rate after the
camera is connected. The camera can only be controlled
with a baud rate of 9600.