Options; Before First Use - Electrolux ESF2300OW User Manual

5. OPTIONS

Activate or deactivate the options
before the start of a programme.
You cannot activate or deactivate
the options while a programme
operates.
If one or more options are set,
make sure that the related indica-
tors are on before the programme
starts.
5.1 EnergySaver
This option decreases the temperature in
the last rinse phase.
The use of this option decreases the ener-
gy consumption (up to 25%) and the pro-
gramme duration.
The dishes can be wet at the end of the
programme.
Press the EnergySaver button. The rela-
ted indicator light comes on.
• This option is selectable for all washing
programmes. The EnergySaver option
has no effect on some programmes.
Refer to the chapter 'Programmes'.
5.2 Extra Rinse
This option adds a cold rinse phase to the
washing programme.
The option increases the programme du-
ration and water consumption.
Press the Extra Rinse button:
• If the option is applicable to the pro-
gramme, the related indicator comes
on. In the display you can see the up-
date of the programme duration.
5.3 Acoustic signals
The acoustic signals operate in these
conditions:

6. BEFORE FIRST USE

1. Make sure that the set level of the wa-
ter softener agrees with the water
hardness in your area. If not, adjust
the water softener. Contact your local
water authority to know the water
hardness in your area.
• The programme is completed.
• The level of the water softener is adjus-
ted electronically.
• The appliance has a malfunction.
Factory setting: off. You can acti-
vate the acoustic signals.
Activating the acoustic signals
1. Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode. Refer to 'SET-
TING AND STARTING A PRO-
GRAMME'.
2. Press and hold function buttons (B)
and (C) at the same time until the indi-
cators of function buttons (A), (B) and
(C) flash.
3. Press function button (C),
• The indicators of function buttons
(A) and (B) go off.
• The indicator of function button (C)
continues to flash.
• The display shows the setting of the
acoustic signals.
4. Press function button (C) to change
the setting.
5. Deactivate the appliance to confirm.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Processing residues can stay in the
appliance. Start a programme to re-
ENGLISH 53
Off
On