Argos pro fitness Assembly & User Instructions page 21

Assembly instructions
4th
2nd
3rd
1st
6th
5th
7th
2
6
3
a.
Step 13
a. Put the Select pin loop (59) onto the Select rod (13) and insert it into the weights.
b. Feed the bolt end of the 3285mm Upper cable (55) up through opening in Upper frame (2). Insert
15mm Pulley bushings (54) into holes and attach 1st Pulley (40) using M10 x 60mm Allen bolt (66) and
M10 Aircraft nut (77).
Repeat procedure a. for 2/3/4 Pulleys, feeding cable up through opening in Upper frame (1).
c. Attach 5th Pulley to Front press base (6) using a M10 x 140mm Allen bolt (69), 2 x 10mm Washers
(75), M10 Aircraft nut (77). Attach 6th Pulley to Vertical frame (3) using a M10 x 40mm Allen bolt (65), 2
x 10mm Washers (75), M10 Aircraft nut (77).
d. Place 7th Pulley (40) onto the cable,fit Pulley covers (41) and Floating pulley bracket (22) using M10
x 40mm Allen bolt (65), 2 x 10mm Washers (75) and M10 Aircraft nut (77).
e. Connect the end of the Upper cable (55) with the Select rod (13)
19