Changing the Mode
Provides the function to turn on the 3D Effect. You can choose between Mode1 and
Mode2. To achieve the 3D effect, the 3D glasses shutter back and forth from the left to
right and vice versa (left/right sync).
: Turns the 3D Effect function off.
: Mode 1 operates with right sync first.
: Mode 2 operates with left sync first.
: Provides picture converted 3D to 2D. You can choose this to watch 2D
picture temporally when you feel dizzy, but you should choose Off to end 3D Effect
If the 3D effect is not working properly, it means the Mode and 3D glasses may not
be syncing properly. To put them in sync, switch to the other mode.
Changing the Format
Select the optimal input format to match your graphic cards or 3D Software.
: If the output format of your graphic card or 3D software is
Checkerboard, select this input format.
: If the output format of your graphic card or 3D software is Horizontal interleaved, select this input format.
: If the output format of your graphic card or 3D software is Vertical interleaved, select this input format.
Picture Reset → Reset Picture Mode / Cancel
Resets all picture settings to the default values.
Select a picture mode to be reset. The reset is performed for each picture mode.
Setting up the TV with your PC
SOURCE button to select PC mode.
Preset: Press the
Auto Adjustment allows the PC screen of set to self-adjust to the incoming PC video
signal. The values of fine, coarse and position are adjusted automatically.
This function does not work in DVI-HDMI mode.
TOOLS button to display Tools menu.
You can also set the adjustment by selecting Tools → Auto Adjustment.
Adjusts the frequency when vertical noise appears on the screen.
Adjusts the screen to be clearer.
Adjust the PC's screen positioning if it does not fit the TV screen. Press the ▲ or ▼
button to adjusting the Vertical-Position. Press the ◄ or ► button to adjust the
You can replace all image settings with the factory default values.
English - 21
HDMI Black Level
Screen Burn Protection
: Checker Board