Samsung PL-42Q91HDP Service Manual page 55

Hide thumbs Also See for PL-42Q91HDP:
Table of Contents

Advertisement

Troubleshooting
White Balance
Adjust spec.
1. Source
: HDMI
2. Setting Mode
: 1280*720@60Hz
3. Pattern
: Pattern #92
4. Use Equipment : MIK-7256 (MSPG925L)
5. Work order
① Connect HDMI (DVI) output terminal of MIK-7256 (MSPG925L) to the HDMI input in main set
② Set the input to HDMI mode
③ Enter the White Balance menu of service mode
④ Contact CA-210 sensor to glass filter
⑤ Adjust the low light
- Adjust Sub-Bright (LBE) to set the 'Y' value
- Adjust R-Offset ('x') and B-Offset ('y') to the color coordinates.
* Do not adjust G-Offset data
⑥ Adjust the high light.
- Adjust Sub-Contrast (LBE) to set the 'Y' value
- Adjust R-Gain ('x') and B-Gain ('y') to the color coordinates.
* Do not adjust the G-gain data
4-28
( SAMSUNG WHITE BALANCE Adjustment PATTERN with FPD )
( Fixed Position of CA210 Probe )
Samsung Electronics

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pl-50q91hdp

Table of Contents