Connecting The Monitor To A Computer - LG E1960S Owner's Manual

Connecting the Display Monitor

Connecting the Monitor to a Computer

1.
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
2.
Connect signal input cable
of the signal cable.
A
Connect D-sub(Analog signal) Cable
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display computer and monitor may differ from the view
shown.
Varies according to model.
Wall-outlet Type
3.
Press the power button on the front panel to turn the power on. When monitor power is
turned on, the 'Self Image Setting Function' is executed automatically.
NOTE
' Self Image Setting Function'? This function provides the user with optimal display
settings.When the user connects the monitor for the first time, this function automatically adjusts
the display to optimal settings for individual input signals.
'AUTO' Function? When you encounter problems such as a blurry screen, blurred letters,
screen flicker or tilted screen while using the device the monitor or after changing screen
resolution, press the AUTO function button to improve resolution.
1
and power cord
A
Power Button
7
E1960S/E2060S/E2260S/E2360S
2
in order, then tighten the screw
Connect the signal
input cable and
tighten it up by
turning in the
direction of the
arrow as shown in
the figure.
When using a D-Sub signal input cable
connector for Macintosh
Mac Adapter : Apple Macintosh needs a
separate plug adaptor to change the 15-pin
supplied D-sub Cable (2 rows) to its 15-pin
High Density D-sub VGA connection(3
rows).