Specifications; General Power Tool Safety Warnings; Save All Warnings And Instructions For Future Reference - Makita BUH650 Instruction Manual

ENGLISH (Original instructions)
1. Red part
2. Button
3. Battery cartridge
4. Housing
5. Knob
6. Handle
7. Switch trigger B
8. Switch trigger A
9. Adjusting dial
10. Indicator lamps
11. CHECK button
12. Adapter
13. Hook
14. Tool
15. Belt

SPECIFICATIONS

Model
Blade length
Strokes per minute (min
Overall length
Net weight
Rated voltage
• Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbol
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
........ Read instruction manual.
..................... Do not expose to rain.
Cd
............... Only for EU countries
Ni-MH
Li-ion
Do not dispose of electric equipment
or battery pack together with
household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and
waste batteries and accumulators
and their implementation in
accordance with national laws,
electric equipment and battery pack
that have reached the end of their life
must be collected separately and
returned to an environmentally
compatible recycling facility.
Intended use
The tool is intended for trimming hedges.
8
Explanation of general view
16. Arm cord hook band
17. Holder
18. Extension cord (Battery adapter)
19. Adapter (Battery adapter)
20. Trimming direction
21. Hedge surface to be trimmed
22. Tilt the blades.
23. String
24. Press
25. Chip receiver
26. Nut
27. Shear blade
28. Branch catcher
29. Hooks
30. Fit the hooks into groove
BUH550
-1
) 1,000 - 1,800
1,070 mm
END013-2
ENE014-1
UH550D
550 mm
1,074 mm
5.1 kg
D.C.36V
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
CORDLESS HEDGE TRIMMER
SAFETY WARNINGS
1. Hold the power tool by insulated gripping surfaces
only, because the cutter blade may contact hidden
wiring. Cutter blades contacting a "live" wire may
make exposed metal parts of the power tool "live" and
could give the operator an electric shock.
2. Keep all parts of the body away from the cutter
blade. Do not remove cut material or hold material
to be cut when blades are moving. Make sure the
switch is off when clearing jammed material. A
moment of inattention while operating the hedge
trimmer may result in serious personal injury.
3. Carry the hedge trimmer by the handle with the
cutter blade stopped. When transporting or
storing the hedge trimmer always fit the cutting
device cover. Proper handling of the hedge trimmer
31. Grooves
32. Press the hooks on both sides
33. Unlock the hooks
34. Blade cover
35. Screws
36. Under cover
37. Plate
38. Crank
39. Oval hole of shear blade
40. Limit mark
41. Holder cap cover
42. Screwdriver
43. Brush holder cap
BUH650
650 mm
1,000 - 1,800
1,150 mm
5.2 kg
D.C.36V
UH650D
1,154 mm
GEA010-1
GEB062-3