Makita TM3000C Instruction Manual page 8

Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode: Sanding
Vibration emission (a
Uncertainty (K): 1.5 m/s
Work mode: Cutting with plunge cut saw blade
Vibration emission (a
Uncertainty (K): 1.5 m/s
Work mode: Cutting with segmental saw blade
Vibration emission (a
Uncertainty (K): 1.5 m/s
Work mode: Scraping
Vibration emission (a
Uncertainty (K): 1.5 m/s
• The declared vibration emission value has been mea-
sured in accordance with the standard test method and
may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the oper-
ator that are based on an estimation of exposure in the
actual conditions of use (taking account of all parts of
the operating cycle such as the times when the tool is
switched off and when it is running idle in addition to
the trigger time).
For European countries only
EC Declaration of Conformity
We Makita Corporation
manufacturer declare that the following Makita
machine(s):
Designation of Machine: Multi Tool
Model No./ Type: TM3000C
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by:
Makita International Europe Ltd.
Technical Department,
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
17.11.2011
Tomoyasu Kato
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN
8
2
): 2.5 m/s or less
h
2
2
): 6.5 m/s
h
2
2
): 3.0 m/s
h
2
2
): 5.5 m/s
h
2
as the responsible
Director
ENG900-1
ENG901-1
ENH101-16