GASKET ASSEMBLY
① Take apart the cabinet gasket clamp.
② Unscrew 2 screws from the cabinet cover.
③ Open the lower cover cap and unscrew 1 screw inside.
④ Take apart the lower cover.
① Disassemble the cantrol panel. (refer to the 25page)
② Unscrew all the screws on the upper and lower sides
of the cabinet cover.
① Take apart the tub gasket clamp.
② Make sure that the drain hole of the gasket is put
beneath when reassembling the gasket.
※Refer to the arrow mark on the tub cover.
27