Download Print this page
   

Advertisement

TR EasyStart
T
R
"
Q
u
i
c
k
T
i
p
T
R
"
Q
u
i
c
k
T
i
p
Discovering "hidden" arpeggio patterns in Program and Combi modes:
When selecting some sounds, the ARP ON/OFF key is unlit, and with other sounds, the key automatically lights, and the arpeggio
pattern(s) trigger as soon as you play the keyboard. Note that there are patterns pre-assigned to every Program and Combination in
the TR. Simply press to turn the ARP key ON (lit), and then play the keyboard to trigger the assigned patterns.
Trying out new arpeggio patterns in Programs and Combis:
After selecting a Program and triggering the assigned arpeggio pattern: Press the F3 key ("Arp")
"Pattern" name assigned
After selecting a Combination and triggering the assigned arpeggio pattern(s): Press the F4 key, and the "check boxes" in the display
will indicate which patterns are set to trigger (A, B or both)
"Pattern" name assigned
Checking the current ROM version # and installed EXB-SMPL option in the TR:
On Power-up, the display will indicate the current software version and all installed options. To download the newest operating systems
as they become available, visit www.korg.com
A few words on user- installation of the EXB-SMPL Sampling option:
The Sampling option includes the EXB-SMPL board/SCSI connector, a 16 Mbyte DRAM SIMM module and screws. You can add another
16 Mbyte or 32 Mbyte SIMM module for a total of 32 or 48 Mbyte sample ram, or reach the maximum sample memory capacity of 64
Mbytes by removing the 16 Mbyte SIMM module, and installing 2- 32 Mbyte SIMM modules. (Specific instructions on how to easily-
install this option can be found in the Parameter Guide, page 260)
To adjust the display contrast:
Press the GLOBAL key
Press F2 ("Pref")
Save your valuable data!
Any edits you make to Programs, Combinations, Drumkits or Global parameters can be written to internal memory and retained on
power-off. Your songs and samples will not be retained on power-off, however. Make sure that you back up all of your valuable data to
SD or via SCSI, if the EXB-SMPL option is installed! For more information, see the Operation Guide, page 42, and pages 100-102.
I
m
p
o
r
t
a
n
t
O
w
n
e
I
m
p
o
r
t
a
n
t
O
w
n
e
Basic Program and Combination editing
Copying a Combination to the Sequencer
Creating and recording RPPR (Realtime Pattern Play/Record)
Sampling: Converting a Multisample to a Program
Sample Looping, Time Slicing and advanced sample editing
Creating a user arpeggio pattern
Effect Guide
Alternate Modulation
Dynamic Modulation
Routing Individual Outputs
Making footswitch and pedal assignments
REMEMBER!
Download free OS updates and other valuable goodies for all of your
KORG products at
s
"
s
"
Press the INC key or rotate the DIAL to select new patterns. (Operation Guide, page 27)
Press the INC key or rotate the DIAL to select new patterns. (Operation Guide, page 29)
CURSOR to "LCD Contrast" and use the DIAL to set as needed.
r
'
s
M
a
n
u
a
l
R
e
f
e
r
e
r
'
s
M
a
n
u
a
l
R
e
f
e
r
e
www.korg.com
Select either with the F4 or F5 keys, then CURSOR ▼to highlight the
n
c
e
s
n
c
e
s
Operation Guide, pg 86 - Param Guide, pgs 89-122
6
CURSOR ▼to highlight the
Operation Guide, pages 49 and 57
Operation Guide, page 77
Operation Guide, page 75
Operation Guide, page 94
Operation Guide, pg 107
Param Guide, pg 159
Param Guide, pg 215
Param Guide, pg 221
Param Guide, pg 166
Operation Guide, pg 117

Advertisement

   Also See for Korg TR

Comments to this Manuals

Symbols: 0
Latest comments: