Specifications - Hitachi C 10FCH2 Technical Data And Service Manual

5. SPECIFICATIONS

0û (Right angle)
Miter right/left 45û
Maximum
cutting
dimensions
Miter right/left 52û
Height x
Width
Bevel left 45û
(H x W)
Miter right/left 45û
+
Bevel left 45û
Miter cutting ranges
Bevel cutting ranges
Compound (miter + left bevel)
cutting ranges
Angle stopper positions
Saw blade outer diameter
Saw blade bore
Lower guard lock
Laser Maximum output
marker
Wave length
(Only Model
C 10FCH2)
Laser medium
Power source type and voltage
Type of motor
Full-load current
No-load rotation speed
Max. output
Main unit dimensions
Width x Depth x Height
C 10FCH2
Weight
C 10FCE2
Coating
Packaging
Cord
Standard accessories
59 mm (2-5/16") x 144 mm (5-21/32")
89 mm (3-1/2") x 101 mm (3-31/32")
59 mm (2-5/16") x 102 mm (4")
89 mm (3-1/2") x 70 mm (2-3/4")
59 mm (2-5/16") x 89 mm (3-1/2")
89 mm (3-1/2") x 54 mm (2-1/8")
41 mm (1-5/8") x 144 mm (5-21/32")
41 mm (1-5/8") x 102 mm (4")
Right and left 0û --- 52û
Left 0û --- 45û
Miter: Right and left 0û --- 45û, Bevel: Left 0û --- 45û
Right and left 0û, 15û, 22.5û, 31.6û, 45û
255 mm (10") external dia.
USA/CAN
15.9 mm (5/8") 30 mm (1-11/64")
Not provided
< 1 mW (CLASS II)
400 nm --- 700 nm
Laser diode
AC single phase 50/60 Hz, 110 V, 120 V, 220 V --- 240 V
AC single phase commutator series motor
110 V --- 120 V: 15 A, 220 V: 7.5 A, 230 V: 7.2 A, 240 V: 6.9 A
5,000 min -1
1,950 W
460 mm x 628 mm x 561 mm (18-1/8" x 24-3/4" x 22-3/32")
12 kg (26. 5 lbs.), gross weight 14.7 kg (32.5 lbs.)
11.9 kg (26. 2 lbs.), gross weight 14.6 kg (32.1 lbs.)
Gunmetallic silver
Corrugated cardboard box
Type: 2-conductor cabtire cable
Length: 1.8 m (6 ft)
255 mm (10") TCT saw blade (24 teeth, Code No. 318963)
• • • • • • • • • • • • • • •
255 mm (10") TCT saw blade (100 teeth, Code No. 319658)
• • • • • • • • • • • • • • •
255 mm (10") TCT saw blade (30 teeth, Code No. 319107)
• • • • • • • • • • • • • • •
Dust bag
Vise ass'y
10 mm box wrench
4 mm hex. bar wrench (only Model C 10FCH2)
Sub fence (Pivot type)
--- 4 ---
Europe Asia/China
25.4 mm (1")
Provided Not provided
for wood cutting (except for China, Europe)
for aluminum cutting (for China)
for wood cutting (for Europe)
AUS/NZL
25.4 mm (1") and
30 mm (1-11/64")
Not provided