INTRODUCTION Thank you for choosing MTX to help reach your ultimate goal with your vehicle. Adding MTX TXC High-end Component speakers and a matching MTX amplifi er with StreetWires connections will put you in a better position to hear, feel, and experience all of the music the artist intended. TXC series component speakers are the best in the MTX offering of full-range speakers.
To isolate the front from the back wave, make sure the speaker is mounted in a baffl e or plate, so that the back of the speaker is in a sealed chamber.
(18 gauge or less), running new high performance wire (http://www.streetwires.com/products/speakerCable/microUltraCable.cfm) will be necessary. The speaker wire should run from the amplifi er’s output terminals, under the carpet and through the factory rubber boot (loom) that protects the wires in the inner door jam. If the factory boot cannot be used, take other measures to protect these wires as best you can.
Page 5
There are three settings on the crossover for Off-axis adjustments- 0˚, 30˚, and 60˚. These positions will compensate for the speaker placement and will use your vehicle’s unique environment to create the best sounding system possible.
Any expenses incurred in the removal and reinstallation of products are not covered by this warranty. MTX Audio’s total liability will not exceed the purchase price of the product. If a defect is present, your authorized MTX Audio dealer may be able to effect repairs. Proof of purchase is required when requesting service.
Need help?
Do you have a question about the MTX Thunder Axe High End Component TXC5.1 and is the answer not in the manual?
Questions and answers