Sample Printouts; Real-Time Printout And Trend #1 Printout - GE TuffSat User's Manual And Service Manual

TuffSat User's Guide and Service Manual

Sample printouts

Real-time

Real-time printout and Trend #1 printout

1.
2.
3.
4.
5.
6.
7.
A-4
Both printouts contain lines for adding comments. The trend printout contains
a patient identification number (ID#).
H:MM indicates the elapsed time since monitoring began for the patient in
hours (H) and minutes (MM).
Real-time: SpO and pulse rate (PR) values print every 15 seconds.
2
Trend: The first data point was stored 15 seconds after monitoring began, then
every 2 minutes.
The average (Avg) and minimum (Min) SpO
Real-time: A new heading prints if you stop, then restart printing.
Trend: A new ID# indicates monitoring stopped for at least 15 seconds.
Dashes (–––) indicate the finger was removed from the sensor while printing.
Monitoring resumed—the sensor was placed on the same patient or on a
different patient while printing.
Trend #1
data points for each patient.
2
Trend #2