Samsung BD-F6500 User Manual page 21

Audio
digital Output
pCM downsampling
dynamic Range Control
downmixing Mode
dTS Neo:6 Mode
Network Status
Network
Network Settings
Wi-Fi direct
Lets you select the digital audio output format that is
suitable for your TV or AV Receiver. For more details,
see the digital output selection table on page 63.
Lets you choose to have 96Khz PCM signals
downsampled to 48Khz before they are outputted to an
amplifier. Choose On if your amplifier or receiver is not
compatible with a 96Khz signal.
Lets you apply dynamic range control to Dolby Digital,
Dolby Digital Plus, and Dolby TrueHD audio.
 Auto : Automatically controls the dynamic range of
Dolby TrueHD audio, based on information in the
Dolby TrueHD soundtrack. Also turns dynamic range
control on for Dolby Digital and Dolby Digital Plus.
 Off : Leaves the dynamic range uncompressed,
letting you hear the original sound.
 On : Turns dynamic range control on for all three
Dolby formats. Quieter sounds are made louder and
the volume of loud sounds is reduced.
Lets you select the multi-channel downmix method that
is compatible with your stereo system. You can choose
to have the player downmix to normal stereo or to
surround compatible stereo.
You can enjoy multichannel sound via HDMI output from
a 2 channel audio source.
Lets you check the current network and Internet status.
Configure the network connection so you can enjoy
various features such as Internet services or AllShare
functionality, and perform Software Updates.
Lets you connect a Wi-Fi Direct device to the player
using a peer-to-pear network, without the need for a
wireless router.
Note that if the player is connected to a wireless network,
it may be disconnected when you use Wi-Fi Direct.
| NOTES |
\ Text files, such as files with a .TXT or .DOC extension, will not
display when you are using the Wi-Fi Direct function.
21
|
English