Related Manuals for Samsung ua43j5100
Summary of Contents for Samsung ua43j5100
-
Page 1: Table Of Contents
• Locking Programme • Using the Sports Mode • Other Features • Using the Family TV Mode function • Viewing the e-Manual • Using the Self Diagnosis Basic Features • Updating the Software • Changing the Use Mode • Changing the Preset Picture Mode • Viewing the Contact Samsung • Adjusting Picture Settings • Changing the Picture Options • Changing the Preset Sound Mode Other Information • Adjusting Sound Settings • Executing initial setup • Anti-theft Kensington Lock Preference Features • Setting the Time • Using the Sleep Timer... -
Page 2: Using The Info Button
❑ Using the INFO button The TV identifies the current channel and the status of certain audio-video settings. When you press the INFO button, a channel information banner will appear on the top of the screen. And then press the E button, you can see the details of the programme. -
Page 3: Memorizing Channels
❑ Memorizing channels Aerial (Terrestrial/Cable) ■ → → → MENU Broadcasting Aerial Before your television can begin memorising the available channels, you must specify the type of signal source that is connected to the TV. ◀ ▶... -
Page 4: Auto Tuning
Auto Tuning ■ → → → MENU Broadcasting Auto Tuning Scans for a channel automatically and stores in the TV. Automatically allocated programme numbers may not correspond to actual or desired programme numbers. If a channel is locked, the PIN input window appears. - Page 5 When selecting Cable: It scans for a channel automatically and stores in the TV. ◀ ▶...
-
Page 6: Using The Channel Menu
❑ Using the Channel menu → → → MENU Broadcasting Channel List Channel List ■ Channel List contains the channels your TV displays when you press the channel button. You can view channel information, All, TV, Radio, Data/Other, Analogue Favourites 1-5. - Page 7 Channel Mode ● Aerial: Switches to Terrestrial or Cable. ● Edit Favourites: Set channels you watch frequently as favourites. For detailed information about using Edit Favourites, refer to “Edit Favourites”. ● Favourites 1-5: Shows all favourite channels, arranged in up to five groups. Each group has a separate screen.
- Page 8 Guide ■ → → → MENU Broadcasting Guide The EPG (Electronic Programme Guide) information is provided by broadcasters. Using programme schedules provided by broadcasters, you can specify programmes you want to watch in advance so that the channel automatically changes to the selected programme channel at the specified time. Programme entries may appear blank or out of date depending on a channel status.
-
Page 9: Schedule Manager
Schedule Manager ■ → → → MENU Broadcasting Schedule Manager You can set a desired channel to be displayed automatically at the intended time. In addition, you can view, modify or delete a channel you have reserved to watch. → →... - Page 10 ● Repeat: Select Once, Manual, Sat~Sun, to set at Mon~Fri Everyday your convenience. If you select Manual, you can set the day you want. The (c) mark indicates the day you’ve selected. ● Date: You can set the desired date. It is available when you select Once in Repeat.
-
Page 11: Edit Channel
Edit Channel ■ → → → MENU Broadcasting Edit Channel You can edit or delete channels. 1. Go to Edit Channel screen. 2. Press the ▲/▼ buttons to select the desired channel, then press the E button. The (c) mark indicates the channel you’ve selected. You can select more than one channel. - Page 12 Using the coloured and function buttons with the Edit Channel. ● (Change Number): Changes channel order on the channel list. ● Green (Delete): Deletes a channel from the channel list. ● Yellow (Lock / Unlock): Lock a channel so that the channel cannot be selected and viewed.
- Page 13 ● Blue (Select All All): Selects or deselects all channels at Deselect once. ● To): Goes to channel directly by pressing numbers (0~9) and the Ÿ E button. ● k (Page): Moves to previous or next page. ● T (Tools): Displays the option menu. The option menu items that appear may differ depending on the channel status and type.
- Page 14 – (only for digital channels ): Changes the list ordered by Sorting channel number or channel name. – Category: Changes the channel mode to All, TV, Radio, Data/ Viewed. The selected Other, Analogue, Recently Viewed, Most channel mode is displayed. –...
- Page 15 Edit Favourites ■ → → → MENU Broadcasting Edit Favourites You can add, edit or delete favourite channels. 1. Go to screen. Edit Favourites 2. Press the ▲/▼ buttons to select the desired channel, and then press E button. 3. Choose a specific favourite list among Favourites 1-5 using (Change...
- Page 16 Using the coloured and function buttons with the Edit Favourites. ● Red (Category) – Category: Changes the channel mode to All, TV, Radio, Analogue, Data/Other, Recently Viewed, Most Viewed. The selected channel mode is displayed. – Change order: Changes the favourite channel order. ●...
- Page 17 ● T (Tools): Displays the option menu among Favourites1-5. The option menu items that appear may differ depending on the channel status and type. – Copy to Favourites: Edit the selected favourite channel in Favourites 1-5. You can copy this channel to the other favourite list.
-
Page 18: Locking Programme
❑ Locking Programme Channel Lock ■ → → → MENU Broadcasting Channel Lock Enter your 4-digit PIN,the default of which is "0-0-0-0".Change the PIN using the Change PIN option. Lock channels in Edit Channel menu to prevent unauthorized users, such as children, from watching unsuitable programme. -
Page 19: Other Features
❑ Other Features Channel Settings ■ → → → MENU Broadcasting Channel Settings ● Manual Tuning Scans for a channel manually and stores in the TV. If a channel is locked, the PIN input window appears. According to the channel source, Manual Tuning may be supported. - Page 20 ● Analogue Channel Tuning: Scans for an analogue channel. Press the button to search the channels by adjusting the Programme, Colour System, Sound System, Channel, Search. Channel mode – (air channel mode) / (cable channel mode): These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel.
- Page 21 Subtitle ■ → → → MENU Broadcasting Subtitle Use this menu to set the Subtitle mode. ● Subtitle: Switches subtitles on or off. ● Subtitle Mode (Normal Hearing Impaired): Sets the subtitle mode. ● Subtitle Language: Sets the subtitle language. If the programme you are watching does not support the Hearing Impaired...
-
Page 22: Audio Options
Audio Options ■ (digital channels only) → → → MENU Broadcasting Audio Options ● Audio Language Change the default value for audio languages. Primary audio Secondary audio: You can set the primary or secondary audio. The available language may differ depending on the broadcast. ◀... - Page 23 ● Audio Description This function handles the Audio Stream for the AD (Audio Description) which is sent along with the Main audio from the broadcaster. Audio Description: Turn the audio description function on or off. Volume: Adjust the audio description volume. ◀...
- Page 24 Digital Text (Disable / Enable) ■ (This function may not support depending on the region.) If the programme broadcasts with digital text, this feature is enabled. MHEG (Multimedia and Hypermedia Information Coding Experts Group): An International standard for data encoding systems used in multimedia and hypermedia.
- Page 25 Guide Type ■ depending on the country MENU → → → E Broadcasting Guide Type Select to use either the built-in or downloaded guide. ● Guide: Set the built-in guide to be displayed when the GUIDE button on the remote control is pressed. ●...
-
Page 26: Changing The Preset Picture Mode
❑ Changing the Preset Picture Mode → → → MENU Picture Picture Mode Picture Mode ■ Select your preferred picture type. ● Dynamic: Suitable for a bright room. ● Standard: Suitable for a normal environment. ● Natural : Provides a display that is comfortable to the Not for LED 4100 model ◀... -
Page 27: Adjusting Picture Settings
❑ Adjusting Picture Settings Backlight Contrast Brightness Sharpness Colour Tint (G/ ■ Your television has several setting options for picture quality control. NOTE ● In analogue TV, modes of the PAL system, the Tint (G/R) function is not available. ● When connecting a PC, you can only make changes to Backlight, ◀... -
Page 28: Picture Size
Picture Size ■ → → → MENU Picture Picture Size Set the various picture options such as picture size and aspect ratio. The available items may differ depending on the selected mode. Depending on the input source, the picture size options may vary. ●... - Page 29 Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size. by using ▲, ▼ button. Adjusts the Zoom Position 4:3: Sets the picture to basic (4:3) mode. Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and centre of the screen may cause image retention (screen burn) which are not covered by the warranty.
- Page 30 NOTE ● After selecting Screen Fit in HDMI (1080i / 1080p) or Component (1080i / 1080p) mode, you may need to centre the picture: 1. Select the Position, press the E button. 2. Press the ▲/▼/◄/► button to move the picture. ●...
- Page 31 ■ → → → MENU Picture You can watch the TV and one external video source simultaneously. For example, if you have a cable box connected to the Cable connector, you can use to watch programs from the cable box and watch a movie from a Blu-ray player attached to the HDMI connector.
- Page 32 ● PIP settings Main picture Sub picture Component, HDMI1, HDMI2/DVI ● PIP: Activate or deactivate the function. ● Aerial: Select either Terrestrial Cable as the input source for the sub-screen. ● Channel: Select the channel for the sub-screen. ● Size (õ...
-
Page 33: Changing The Picture Options
❑ Changing the Picture Options Advanced Settings ■ → → → MENU Picture Advanced Settings (available in Standard Movie mode) You can adjust the detailed setting for the screen including colour and contrast. When connecting a PC, you can only make changes to the White Balance and Gamma. - Page 34 ● RGB Only Mode (Off / Blue): Displays the red, green and blue Green colour for making fine adjustments to the hue and saturation. ● Colour Space (Auto / Native): Adjust the range of colours available to create the image. Auto automatically adjusts the colour space depending on the input signal.
- Page 35 ● Gamma: Adjust the primary colour intensity. ● Motion Lighting: Reduce power consumption by brightness control adapted motion. Only available in Standard mode. ◀ ▶...
-
Page 36: Picture Options
Picture Options ■ → → → MENU Picture Picture Options When connecting a PC, you can only make changes to the Colour Tone. ● Colour Tone will be deactivated when the picture mode is Warm1 Warm2 Dynamic. Settings can be adjusted and stored for each external device connected to an input on the TV. - Page 37 ● View: If the broadcast signal received by your TV is weak, you Digital Clean can activate the Digital Clean View feature to reduce any static and ghosting that may appear on the screen. When the signal is weak, try other options until the best picture is displayed.
- Page 38 ● HDMI Black Level: Selects the black level on the screen to adjust the screen depth. Available only in HDMI mode (RGB signals). ● Film Mode (Off Auto1 / Auto2): Sets the TV to automatically sense and process film signals from all sources and adjust the picture for optimum quality.
- Page 39 ● View: Reduce diagonal noise in the picture, caused by the Analogue Clean crosstalk of signal. ● Motion: Removes drag from fast scenes with a lot of movement LED Clear to provide a clear picture. It will be deactivated when the picture mode is set to Natural. The screen may become slightly darker when you play LED Clear Motion.
-
Page 40: Picture Off
Picture Off ■ → → → MENU Picture Picture Off The screen is turned off but the sound remains on. Press any button except the volume button and power button to turn on the screen. ◀ ▶... - Page 41 Reset Picture ■ → → → MENU Picture Reset Picture Resets your current picture mode to its default settings. ◀ ▶...
-
Page 42: Changing The Preset Sound Mode
❑ Changing the Preset Sound Mode Sound Mode ■ → → → MENU Sound Sound Mode ● Standard: Selects the normal sound mode. ● Music: Emphasizes music over voices. ● Movie: Provides the best sound for movies. ● Clear Voice: Emphasizes voices over other sounds. ◀... -
Page 43: Adjusting Sound Settings
❑ Adjusting Sound Settings Sound Effect ■ (standard sound mode only → → → MENU Sound Sound Effect ● DTS TruSurround HD This function provides a virtual 5.1 channel surround sound experience through a pair of speakers using HRTF (Head Related Transfer Function) technology. - Page 44 ● Equaliser Use Equaliser to customize sound setting for each speaker. Balance: Adjusts the balance between the right and left speaker. 100Hz 300Hz 1kHz 3kHz 10kHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies. Reset: Resets the equaliser to its default settings. Speaker Select is set to External...
-
Page 45: Speaker Settings
Speaker Settings ■ → → → MENU Sound Speaker Settings ● Speaker Select This lets you choose which speakers the TV uses for audio output. When Speaker Select is set to External Speaker, the volume and MUTE buttons will not operate and the sound settings will be limited. When Speaker Select is set to... - Page 46 ● Auto Volume To equalize the volume level on each channel, set to Normal. Night: This mode provides an improved sound experience compared to Normal mode, making almost no noise. It is useful at night. To use the volume control on the source device connected to the TV, Auto Volume on the TV.
-
Page 47: Additional Settings
Additional Settings ■ → → → MENU Sound Additional Settings ● This function allows DTV Audio Level MPEG HE-AAC digital channels only you to reduce the disparity of a voice signal (which is one of the signals received during a digital TV broadcast) to a desired level. According to the type of broadcast signal, can be MPEG... - Page 48 ● Out: Digital Audio out is used to provide digital sound, reducing Digital Audio interference going to speakers and various digital devices such as a DVD player. Format: You can select the Digital Audio output format. The available Audio Digital Audio output format may differ depending on the input source. By connecting to 5.1ch speakers in a Dolby Digital setup, maximize your interactive 3D sound experience.
- Page 49 ● (digital channel only): This function minimizes signal Dolby Digital Comp disparity between a dolby digital signal and a voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound). Select to obtain dynamic sound, and to reduce the difference Line between loud and soft sounds at night time. Line: Set the output level for signals greater or less than -31dB (reference) to either -20dB or -31dB.
- Page 50 Reset Sound ■ → → → MENU Sound Reset Sound Reset all sound settings to the factory defaults. ◀ ▶...
-
Page 51: Executing Initial Setup
❑ Executing initial setup Setup ■ → → → MENU System Setup Configure the channels and languages when setting up the TV for the first time or when resetting the unit. Execute the initial setup following instructions that the TV guides. The default PIN is: 0000 ◀... -
Page 52: Setting The Time
❑ Setting the Time Time ■ → → → MENU System Time The current time will appear every time you press the INFO button. ● Clock: Setting the clock is for using various timer features of the TV. If you disconnect the power cord, you have to set the clock again. Mode: Set up the current time manually or automatically. - Page 53 – Manual: Set the current time manually. Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the time manually. Clock Set: Set the Date and Time. Available only when Clock Set is set to Manual.
-
Page 54: Using The Sleep Timer
❑ Using the Sleep Timer → → → → MENU System Time Sleep Timer ● Sleep Timer t: Automatically shuts off the TV after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes). Use the ▲/▼ buttons to select a period of time, and then press the E button. -
Page 55: Setting The On / Off Timer
❑ Setting the On / Off Timer → → → → MENU System Time On Timer Off Timer ● Timer: You can set up three separate On Timer configurations. (On Timer On Timer On Timer Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun Manual to set at your convenience. - Page 56 Source: To select the source of the content that will play when the TV turns on. You can: – Select and have the TV display a specific air or cable channel. – Select and have the TV play back photo or audio files from a USB device.
- Page 57 If you select a source other than or USB, you must: ● Have a cable or satellite set-top box attached to that source. ● Set the set-top box to the channel you want to watch when the TV goes on. ●...
- Page 58 Music Photo (when the Source is set to USB): Select a folder in the USB device containing music or photo files to be played when the TV is turned on automatically. – If there is no music file on the USB device or the folder containing a music file is not selected, the timer function does not operate correctly.
- Page 59 – It is recommended that you use a USB memory stick and a multi card reader when using Timer. – On Timer function may not work with USB devices with a built-in battery, MP3 players, or PMPs made by some manufacturers because these devices take a long time to be recognized.
-
Page 60: Economical Solutions
❑ Economical Solutions Eco Solution ■ → → → MENU System Eco Solution ● Energy Saving (Off Medium / High): This adjusts the brightness of the TV in order to reduce power consumption. ● Eco Sensor : To enhance your power savings, the picture Not for LED 4100 model settings will automatically adapt to the light in the room. - Page 61 ● No Signal Power Off (Off min): To avoid unnecessary 15 min 30 min energy consumption, set how long you want the TV to remain on if it’s not receiving a signal. Disabled when the PC is in power saving mode. ●...
-
Page 62: Other Features
❑ Other Features Menu Language ■ → → → MENU System Menu Language Set the menu language. ◀ ▶... -
Page 63: Change Pin
Change PIN ■ → → → MENU System Change PIN Change your password required to set up the TV. The PIN input screen appears before the set up screen. Enter your 4-digit PIN (The default Pin is 「 0-0-0-0 」 ). Change the PIN using option. -
Page 64: Auto Protection Time
Auto Protection Time ■ → → → MENU System Auto Protection Time If the screen remains idle with a still image for a certain period of time defined by the user, the screen saver is activated to prevent the formation of ghost images on the screen. - Page 65 General ■ → → → MENU System General ● Mode: When connecting to a game console such as Play Station™ or Game Xbox™, you can enjoy a more realistic gaming experience by selecting game mode. NOTE ● Precautions and limitations for game mode. –...
- Page 66 ● Panel Lock: Lock or unlock all the keys on the TV. When Panel lock is on, none of the keys on the panel will work. ● Boot Logo: Display Samsung logo when the TV is turned on. ◀ ▶...
- Page 67 DivX® Video On Demand ■ → → → MENU System DivX® Video On Demand Shows the registration code authorized for the TV. If you connect to the DivX web site and register with 10-digit registration code, you can download the VOD activation file.
-
Page 68: Using The Source List
❑ Using the Source List Source List ■ → → → MENU Applications Source List When you press the SOURCEs button, Source screen will be displayed at once. You can only choose external devices that are connected to the TV. In Source, connected inputs are highlighted. -
Page 69: Connecting A Usb Device
❑ Connecting a USB Device 1. Turn on your TV. 2. Connect a USB device containing photo, music and movie files to the USB port on the side of the TV. 3. When USB is connected to the TV, popup window appears. You can select the Photos, Videos, Music, or directly. - Page 70 It might not work properly with unlicenced multimedia files. Need-to-Know List before using Media Play. ● MTP (Media Transfer Protocol) is not supported. ● The file system supports NTFS (Read Only), FAT16 and FAT32. ● Certain types of USB Digital camera and audio devices may not be compatible with this TV.
- Page 71 ● Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss. ● Do not disconnect the USB device while it is loading.
- Page 72 ● MP3 files with DRM that have been downloaded from a non-free site can not be played. Digital Rights Management (DRM) is a technology that supports the creation, distribution and management of the content in an integrated and comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the illegal copying of contents, as well as managing billings and settlements.
- Page 73 ● If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read. ● If a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list is not played, connect the USB device to the PC, format the device and check the connection.
- Page 74 Disconnecting a USB Device 1. Press the SOURCEs button. 2. Select a desired USB device, and then press the TOOLS T button. The menu appears. Tools 3. Select Disconnect USB Device, and then wait until the selected USB device is disconnected. You can remove a USB device from the TV. To remove a USB device from the TV, we recommend use Disconnect USB Device...
-
Page 75: Using The Media Play
❑ Using the Media Play → → → MENU Applications Media Play Enjoy photos, music and movie files saved on a USB Mass Storage Class (MSC) device. 1. Press the MEDIA.P button. 2. Press ◄/► button to select desired menu (Photos, Videos, Music, Story Replay), then press the E button. - Page 76 Playing the selected files 1. Press the ▲ button to select at the top of each main screen and Options select Play Selected. 2. Select the desired files. The check box appears to the left of the selected files, press E to choose the file.
- Page 77 Copy the files 1. Press the ▲ button to select at the top of the each main screen and Options select Copy. 2. Select the files The Check box appears to the left of the files, press E to choose the file.
-
Page 78: Playing The Photos / Videos / Music / Story Replay
❑ Playing the Photos / Videos / Music / Story Replay During playing a file, press the ▲/▼/◄/► button to select the desired menu. When the option menu is not displayed, press the TOOLS T button or E button. You can also use ∂/∑/∫/π/μ buttons on the remote control during play. -
Page 79: Play Menu
Play menu Button Operation Photos Videos Music ● Previous Next ● Start Slide Show Stop Slide Show Play Pause ● ● ● ● Previous Next ● ● Rewind Fast forward ◀ ▶ * When setting the Background Music Mini Player in Photos, these buttons appear. -
Page 80: Setting Menu
Setting menu ● Photos Button Operation Slide Show Settings You can set the Speed Effects during the slide show. Zoom You can zoom the image . Rotate You can rotate images in full screen mode. Background Music You can set background music when watching a slide show. ◀... - Page 81 During the slide show, all files in the file list will be displayed in order. When you press the ∂ (Play) button (or ▲ button → → Options Slide Show) in the file list, slide show will be started immediately. During the slide show, you can adjust the slide show speed using π...
- Page 82 ● Videos Button Operation Search Search Titles: You can move to the other file directly. Search Time Bar: You can search the video using ◄ and ► button at one minute interval or entering the number directly. N It may not be supported depending on the input source. Repeat Mode You can play movie files repeatedly.
- Page 83 If video time information is unknown, play time and progress bar are not displayed. In this mode, you can enjoy movie clips contained on a Game, but you cannot play the Game it self. • Supported Subtitle / Video Formats For the details, refer to “Specifications”...
- Page 84 ● Music Button Operation Repeat You can play music files repeatedly. Shuffle You can play the music randomly. Sound Mode You can adjust the sound setting. Only displays the files with supported music file extension. Other file extensions are not displayed, even if they are saved on the same USB device. ◀...
- Page 85 Setting the Encoding language Set the encoding language if the text is not supported. 1. Press the ▲ button to select Options at the top of music main screen and select Encoding. 2. Select the desired encoding language. ● Story Replay Media Play enables you to play content saved on the USB device connected to the TV.
-
Page 86: Using The Sports Mode
❑ Using the Sports Mode Sports Mode ■ → → → MENU Applications Sports Mode The name may differ depending on the region. This mode provides optimized condition for watching sports games. ● (Zoom): Pause play and divide the picture into 9 parts. Select a part to zoom it in. -
Page 87: Using The Family Tv Mode Function
❑ Using the Family TV Mode function Family TV Mode ■ → → → MENU Applications Family TV Mode This function provides capture screen or record an audio from the TV screen being viewing. Additionally, you can save the capture image and record audio on the USB device connected the TV. - Page 88 Screen Capture 1. To capture the screen while watching TV, press {. This captures the screen. It may take 2 to 3 seconds to capture the screen. 2. Once captured, the image is saved as a .jpg file to the USB device connected to the TV.
- Page 89 Sound Recording 1. Press }. This records audio in real-time. A popup window will appear on the screen while recording is in progress. The popup window displays the duration of the recording. 2. To stop recording, press }. The recording is stored as a .mp3 file on the USB device connected to the TV.
- Page 90 Story Replay 1. Press to start Replay. This records audio in real-time, and captures Story the screen every 5 seconds in the meanwhile. A popup window will appear on the screen while recording is in progress. The popup window displays the duration of the recording. 2.
- Page 91 Story Replay feature is just an application provided by samsung and samsung does not take any responsibility of its use by the user. The use/intended use of the application is for the personal or private use of the user only. User shall...
-
Page 92: Viewing The E-Manual
❑ Viewing the e-Manual e-Manual ■ → → → MENU Support e-Manual You can read the introduction and instructions about the TV features stored in your TV. For the detailed information about e-Manual Screen, refer to “How to use the e-Manual”... -
Page 93: Using The Self Diagnosis
❑ Using the Self Diagnosis Self Diagnosis ■ → → → MENU Support Self Diagnosis Self Diagnosis might take few seconds, this is part of the normal operation of the TV. ● Test: Use to check for picture programmes. Picture ●... - Page 94 ● (digital channels only): HDTV channel’s reception quality Signal Information is either perfect or the channels are unavailable. Adjust your aerial to increase signal strength. ● Reset: Reset all settings to the factory defaults except network settings. The PIN input screen appears before the setup screen. Enter your 4-digit PIN.
-
Page 95: Updating The Software
❑ Updating the Software Software Update ■ → → → MENU Support Software Update Software Update menu lets you upgrade your TV’s software to the latest version. Current Version: This is the software version already installed in the TV. When software is upgraded, video and audio settings you have made will ◀... - Page 96 – By USB : Insert a USB drive containing the firmware upgrade file, downloaded from "www.samsung.com" into the TV. Please be careful not to disconnect the power or remove the USB drive until uprades are complete. The TV will be turned off and on automatically after completing the firmware upgrade.
- Page 97 ● Auto update A manual upgrade will be automatically performed when TV is in standby mode. Since the power of the unit is turned on internally, the screen may be turned on slightly for the product. This phenomenon may continue for more than 1 hour until the software upgrade is complete.
-
Page 98: Changing The Use Mode
❑ Changing the Use Mode Use Mode ■ → → → MENU Support Use Mode Select the Use Mode suitable for your place. We strongly recommend you select Home Use. ● Home Use: Home Use is the default setting. ● Store Demo: Store Demo... -
Page 99: Viewing The Contact Samsung
❑ Viewing the Contact Samsung Contact Samsung ■ → → → MENU Support Contact Samsung View this information when your TV does not work properly or when you want to upgrade the software. You can find information regarding our call centres, and how to download products and software. -
Page 100: Anti-Theft Kensington Lock
❑ Anti-theft Kensington Lock The Kensington Lock is not supplied by Samsung. It is a device used to physically fix the system when using it in a public place. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual provided with the Kensington Lock for additional information on proper use. - Page 101 To lock the product, follow these steps 1. Wrap the Kensington lock cable around a large, stationary object such as desk or <TV Rear> chair. 2. Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable.