AW2816
4-15 Digital I/O Function Test (16 DIGITAL I/O)
“=== DIGITAL I/O===” is displayed on the LCD.
(1) Test Content
1) Checks whether the digital I/O (SPDIF format) signal
can be sent and received correctly.
2) Checks the digital audio signals.
(2) Judgment
1) If all the test results are “OK”
ENTER
Press the
key. The test menu will reappear with
displayed to the left of the test item (DIGITAL I/O),
and the cursor advances to the next test in the menu.
2) If the following NG messages appear:
STATUS→Problem with DIGITAL AUDIO signal’s
•
status bit
EMPHASIS→Problem with DIGITAL AUDIO signal’s
•
emphasis information Problem with
DIREMP signal of DIR2 (IC408)
DIR LOCK→Problem with /RES-DIT signal of DIT (IC409)
•
Problem with LOCK signal of DIR (IC408)
Problem with DIGITAL AUDIO signal
DIR SPDWCK→Problem with 128FS signal of DIT
•
(IC409)
Problem with SPDWCK signal of DIR
(IC408)
Problem with DIGITAL AUDIO signal
CANCEL
Press the
key. The test menu will reappear with
NG displayed to the left of the test item (DIGITAL I/
O). The cursor does not advance.
4-16 Fader Test (17 FADER)
“=== FADER===” is displayed on the LCD.
(1) Test Content
1) Checks the fader operation.
(2) Judgment
1) The following instructions will appear on the LCD.
--- SLOW MODE ---
PUSH [SONG ] [FILE
]
[SETUP] [UTILITY]
[CD
] [QUICK REC] key [MIDI ] [PATCH] key
QUICK
Press the
key, and check that positional
REC
variation between adjacent faders is within 2.5mm,
and that the largest positional variation among the
nine faders is within 5.0mm.
Press the
SONG
key, and check that all the faders
move to the ∞ position.
Press the
FILE
key, and check that all the faders
move to the +6 (0) position.
CD
Press the
key, and check that all the faders
PLAY
move near to the 7.5 (25) position.