Related Manuals for Genaray MonoBright LED BI-COLOR 750
Summary of Contents for Genaray MonoBright LED BI-COLOR 750
- Page 1 MonoBright ™ LED BI-COLOR 750 USER MANUAL MonoBright LED Bi-Color 750 - USER MANUAL...
-
Page 2: Introduction
AC voltages (with appropriate plug adapter) and can also be run on an optional 12 V DC battery. Thanks to its small, lightweight build and convenient carry handle, the MonoBright is perfect for the traveling or location photographer. MonoBright LED Bi-Color 750 - USER MANUAL... -
Page 3: Table Of Contents
The built-in umbrella receptacle and S-mount allow you to attach light modifiers Specifications ......18-19 like umbrellas, softboxes, and beauty dishes to customize and sculpt your light for the perfect look. FCC Statement ......19 Warranty ........20 MonoBright LED Bi-Color 750 - USER MANUAL... -
Page 4: Precautions
MonoBright Bi-Color. · Do not stare at the light · Make sure this product is powered off when it is powered on. when plugging it into a power source. MonoBright LED Bi-Color 750 - USER MANUAL... - Page 5 LED. · Handle this product with care. · Do not touch the LED or expose it to moisture. · If necessary, clean the LED with only a lint-free, cotton cloth. Do not smudge. MonoBright LED Bi-Color 750 - USER MANUAL...
-
Page 6: Overview
S-mount PRODUCT OVERVIEW HiBrite Bi-Color microLED PCB Umbrella Locking knob receptacle Mounting socket MonoBright LED Bi-Color 750 - USER MANUAL... - Page 7 Handle Accessory release Umbrella thumbscrew Tilt adjustment knob MonoBright LED Bi-Color 750 - USER MANUAL...
- Page 8 Wireless sensor Dimmer indicator ( ) Color temperature indicator ( ) Display PRODUCT OVERVIEW Dimmer knob DC and AC adapter XLR input socket Power Switch MonoBright LED Bi-Color 750 - USER MANUAL...
- Page 9 7˝ umbrella/grid reflector Transport Diffuser AC/DC cover adapter AC cable MonoBright LED Bi-Color 750 - USER MANUAL...
-
Page 10: Mounting The Monobright
3. Tighten the locking knob until secure. You can adjust the tilt of the MonoBright Bi- Color by loosening the tilt adjustment knob. Keep one hand on the light to hold it steady. MonoBright LED Bi-Color 750 - USER MANUAL... -
Page 11: Mounting Accessories
To install an accessory, follow these steps: 1. Align your accessory’s mounting pegs with the corresponding notches on the MonoBright Bi-Color’s S-mount. MonoBright LED Bi-Color 750 - USER MANUAL... - Page 12 When mounting a softbox, make sure your softbox’s speed ring is compatible with the S-mount. For example, if you want to mount the Raya 32˝ Octa Soft Box, which MonoBright LED Bi-Color 750 - USER MANUAL...
-
Page 13: Powering The Monobright
Do not turn on the MonoBright Bi-Color connect the adapter’s XLR connector to while the transport cover is mounted. the MonoBright Bi-Color’s XLR input. To turn on the MonoBright Bi- Color, press the power switch. MonoBright LED Bi-Color 750 - USER MANUAL... - Page 14 Genaray MB-BCCL cable. MonoBright Bi-Color’s power switch. Note: Use only Genaray MonoBright battery cables with MonoBright LED lights. Cables from other manufacturers may be incompatible and may cause damage. MonoBright LED Bi-Color 750 - USER MANUAL...
-
Page 15: The Control Panel
Rotate the knob to adjust the output. panel’s dimmer knob. The knob is graduated, so each notch is one increment. Quickly moving the knob will accelerate the speed at which you’ll reach the top or bottom of the scale. MonoBright LED Bi-Color 750 - USER MANUAL... - Page 16 Rotate the dimmer knob to cycle through the channels. MonoBright LED Bi-Color 750 - USER MANUAL...
- Page 17 To display the value, you can manually change the mode on the MonoBright Bi-Color’s control panel (see Adjusting Power Output on page 15 and Adjusting Color Temperature on page 16). MonoBright LED Bi-Color 750 - USER MANUAL...
-
Page 18: Specifications
(D × W × H) 8˝ × 6˝ × 8.25˝ DC operating voltage: 12–17 V DC (20.3 × 15.2 × 20.9 cm) Cable length Weight: 2.6 lb. (1.2 kg) AC cable: 15.5´ (4.7 m) XLR connector (female): 12´ (3.7 m) MonoBright LED Bi-Color 750 - USER MANUAL... -
Page 19: Fcc Statement
(1) this device may not cause Beam angle: 60° harmful interference, and (2) this device Diameter: 7˝ must accept any interference received, including interference that may cause Reflector type: Umbrella/grid reflector undesired operation. Finish: High-gloss polish MonoBright LED Bi-Color 750 - USER MANUAL... -
Page 20: Warranty
ONE-YEAR LIMITED WARRANTY This Genaray product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. Genaray’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at Genaray’s discretion, of...
Need help?
Do you have a question about the MonoBright LED BI-COLOR 750 and is the answer not in the manual?
Questions and answers