Multiple Handsets; Registering Handsets - Gigaset e630 Instruction Manual

Multiple handsets

Multiple handsets

Registering handsets

You can register up to six handsets to your base. You must initiate handset registration on the
handset and on the base station. Both must be carried out within 60 secs.
¤
On the base station: hold (min. 3 secs) the Registration/paging key (
¤
On the handset E630 (for other handsets see "Notes"):
- If the handset is not already registered to a base station: Press the display key Register.
Ï
- If the handset is already registered to a base station:
v ¤ ¤
OK
¤
If the handset is already registered to four bases: q Select a base.
The connection to the base is established, this may take some time.
¤
Enter the system PIN if required (factory setting: 0000).
Successful registration is shown on the display.
Notes
u
If six handsets are already registered to the base (all internal numbers assigned), replace
the handset with the internal number 6 with the new one. If this is not possible, because
a conversation is being held for example, the message No available internal number is
given. In this case, de-register another handset that is no longer required and repeat the
registration procedure.
u
For other Gigaset handsets and handsets for other devices with GAP functionality, start
the registration of the handset according to the respective user guide.
Using the handset on multiple bases
Your handset can be registered on up to four bases.
The active base is the base to which the handset was last registered. The other bases remain
saved in the list of available bases.
You can change the assignment to the base manually at any time.
Alternatively, you can set the handset so that it selects the base with the best reception (Best
Ï
Base), as soon as it loses connection to the current base.
¤ ¤ ¤
v q Registration
OK
¤
Base. Select (Ø = selected)
Changing name of a base station Ï
¤ ¤ ¤
v q Registration
OK
¤
(Ø = selected) Name
36
¤ q Registration ¤
¤ ¤
OK
¤ ¤
OK
¤ ¤
Change name.
¤
OK Register Handset
¤
OK
¤ ¤
Select Base OK
¤ ¤
Select Base OK
Save
¢
page 2).
¤
OK
¤
OK
q Select base or Best
¤
q Select base.
Select
en fr es