General Maintenance; Optional Accessory - Makita DCM500 Instruction Manual
Cordless coffee maker
Hide thumbs
Also See for DCM500:
- Instruction manual (61 pages) ,
- Instruction manual (61 pages) ,
- Instruction manual (25 pages)
Table of Contents
Advertisement
Available languages
Available languages
BREWING
Open the water tank lid (Fig. C-5) and pour 150 ml of
1.
fresh cold water.
Pour water until the “LIMIT” island (Fig. F-17) just
sinks.
NOTE
•
Do not pour in too much water, or water may run out
of the overlow opening (Fig. F-18).
Remove the ilter holder (Fig. C-8) with ilter (Fig. C-7)
.
from the appliance, put . gram of ground coffee
into the ilter using the measure (Fig. C-14), and then
reinsert the ilter holder in the appliance.
NOTE
Place the ilter correctly in the ilter holder (Fig. G-8).
•
Otherwise, the ilter holder cannot be inserted
correctly.
•
Adjust the amount of ground coffee to your
preference.
.
Place a cup on the cup rest (Fig. C-9).
Press the power switch (Fig. C-10).
.
The power switch lights up and the brewing cycle
begins.
When the brewing cycle has ended, the appliance
automatically turns off and the power switch light
goes off.
NOTE
To stop brewing, press the power switch (Fig. C-10).
•
The appliance turns off and the power switch light goes
off.
•
With AC operation, a brewing cycle takes approx.
minutes, while with battery operation, it takes approx. 7
minutes (the cycle time varies depending on the amount
of water, temperature, and other conditions). The longer
the brewing cycle, the stronger the coffee.
CAUTION
To reduce the risk of scalding, do not remove the ilter
•
holder (Fig. C-8) during the brewing cycle.
(Fig. H) is
•
When the brewing section marked with
steaming, do not touch it.
Steam builds up under the ilter holder (Fig. C-8).
•
•
Do not touch the bottom plate (Fig. C-11) during the
brewing cycle.
•
After the brewing cycle completes, wait at least
minutes before removing the ilter holder.
•
If another brewing cycle is to be started, wait at least
minutes before pouring in cold water. Otherwise,
steam and hot water could be released and scalding
may result.
8
CLEANING
Proper maintenance will ensure years of service for
your appliance. Clean the appliance after every use to
maintain quality coffee lavor.
WARNING
•
Do not immerse the appliance, AC power cord, or
battery holder in water or other liquids.
1.
Unplug the AC power cord/battery holder from the
appliance and allow the appliance to cool.
.
Wipe the exterior with a soft cloth moistened with
water.
NOTE
• Do not use abrasive cleansers or scouring pads.
Remove the ilter holder (Fig. C-8) with ilter (Fig. C-7)
.
from the appliance, wash them in hot, soapy water,
and then rinse them with hot water.
.
Allow the appliance and all parts to dry completely.
NOTE
•
Do not dry the inside of the water tank (Fig. C-) with a
cloth, as lint may remain.
STORAGE
To prevent ire or burning, allow the appliance to cool
•
down completely before you store it.
•
Do not store the discharged battery for long periods, as
it can shorten its service life.
•
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized Service Centers,
always using Makita replacement parts.
MAINTENANCE
WARNING
•
When servicing is required, ask a Makita authorized
service center which deals genuine replacement parts.
Use of any other parts may create a hazard or cause
product damage.
WARNING
•
To avoid serious personal injury, always remove the
AC power cord or battery cartridge from the unit when
cleaning or performing any maintenance.
GENERAL MAINTENANCE
Never use gasoline, benzine, thinner, alcohol or the like
when cleaning plastic parts. Discoloration, deformation
or cracks may result. After appliance cooled, use clean
clothes to remove dirt, dust, oil, grease etc.
OPTIONAL ACCESSORY
CAUTION
•
These accessories or attachments are recommended
for use with your appliance speciied in this manual.
The use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
•
Makita genuine battery and charger
NOTE
•
Some items in the list may be included in the appliance
package as standard accessories. They may differ from
country to country.
- Quick Links:
- Specifications
Hide quick links:
Advertisement
Table of Contents
